AR# 67933

UltraScale/UltraScale+ Memory IP - Error messages generated after archiving and moving a project containing Memory IP with a custom part

描述

Version Found: DDR4 v2.1, DDR3 v1.3, RLDRAM3 v1.3, QDRII+ v1.3, QDRIV v1.2

Version Resolved: See (Xilinx Answer 58435)

When a project containing Memory IP configured with a custom part is archived, moved, and then un-archived, the example design generated for the IP from the un-archived project fails during synthesis with the below errors:

ERROR: [Synth 8-439] module 'my_mig_phy' not found [/proj/dsv_xhd/pparata/ddr3_arch/ex_proj/my_mig_ex/my_mig_ex.srcs/sources_1/ip/my_mig/rtl/ip_top/my_mig_ddr3_mem_intfc.sv:595]
ERROR: [Synth 8-285] failed synthesizing module 'my_mig_ddr3_mem_intfc' [/proj/dsv_xhd/pparata/ddr3_arch/ex_proj/my_mig_ex/my_mig_ex.srcs/sources_1/ip/my_mig/rtl/ip_top/my_mig_ddr3_mem_intfc.sv:70]
ERROR: [Synth 8-285] failed synthesizing module 'my_mig_ddr3' [/proj/dsv_xhd/pparata/ddr3_arch/ex_proj/my_mig_ex/my_mig_ex.srcs/sources_1/ip/my_mig/rtl/ip_top/my_mig_ddr3.sv:153]
ERROR: [Synth 8-285] failed synthesizing module 'my_mig' [/proj/dsv_xhd/pparata/ddr3_arch/ex_proj/my_mig_ex/my_mig_ex.srcs/sources_1/ip/my_mig/rtl/ip_top/my_mig.sv:73]

解决方案

There are two available work-arounds for the issue:


  • Close and reopen the example project
  • Regenerate the Memory IP in the example project

Revision History:

09/26/2016 - Initial Release

链接问答记录

主要问答记录

Answer Number 问答标题 问题版本 已解决问题的版本
58435 UltraScale/UltraScale+ Memory IP - Master Release Notes and Known Issues N/A N/A
AR# 67933
日期 01/12/2018
状态 Active
Type 已知问题
器件 More Less
Tools
IP