We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 67938

2016.X - Simulation - ModelSim generates error when simulating XPM


When using ModelSim to run simulation with XPM, I receive the following errors:

# ** Error: C:/Xilinx/Vivado/2016.2/data/ip/xpm/xpm_memory/hdl/xpm_memory_base.sv(2423): data type of variable mem not allowed in force.
# ** Error: C:/Xilinx/Vivado/2016.2/data/ip/xpm/xpm_memory/hdl/xpm_memory_base.sv(2425): data type of variable mem not allowed in release.


The errors are seen when using older versions of ModelSim when an XPM is present in the design.

Please refer to (UG973) Vivado Release Notes to find the supported version.

For Vivado 2016.2, the supported ModelSim version is 10.4d and newer.

AR# 67938
日期 09/30/2016
状态 Active
Type 综合文章
  • Vivado Design Suite - 2016.2
  • Vivado Design Suite - 2016.1
  • Vivado Design Suite - 2016.3