UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 68016

HDMI Transmitter and Receiver Subsystems v2.0 (Rev. 2) - Example Design - Why do of some video test patterns not generate outputs in the example design?

描述

Why do of some video test patterns not generate outputs in the example design?

When trying the HDMI Subsystem Example Design on the KCU105 board, the following Video Pattern did not work:

  • Solid colors
  • Vertical ramp
  • Horizontal ramp
  • Rainbow color

解决方案

In the Vivado 2016.3 Test Pattern Generator v7.0 (Rev. 4) not all the tests patterns are enabled by default. See (Xilinx Answer 68009) for more information.

This has been addressed in the HDMI Example Design for the HDMI Transmitter and Receiver Subsystems v2.0 (Rev. 4) in Vivado 2017.1 and later. 

The menus will dynamically update to enable features based on what options are selected in the Test Pattern Generator.


You can work around this by editing the Test Pattern Generator used in the HDMI Subsystem example design. 

Open the Video Test Pattern Generator GUI and add the additional video test patterns by selecting the associated check box and regenerating.

链接问答记录

相关答复记录

AR# 68016
日期 10/24/2017
状态 Active
Type 综合文章
IP
的页面