UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 6809

LogiCORE PCI/PCI-X - Parity lines appear to be in conflict or not driven at all during simulation

Description

General Description:

During simulation of a PCI or PCI-X LogiCORE, the parity lines appear unknowns or undefineds ("x"). Does this mean that the signal is not being properly driven during bus parking or some other time?

解决方案

These "x"s are appearing as the result of a high-Z being pushed into a register. The HDL used to define parity generation does not include pull-ups or pull-downs; therefore, signals may go to high-z during simulation when in actual hardware implementation, they would instead be driven to a real value. These unknowns can be ignored and parity can be assumed to be driven as the spec requires, and to be driven properly.

AR# 6809
创建日期 08/21/2007
Last Updated 12/15/2012
状态 Active
Type 综合文章