UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 68317

HDMI Receiver (RX) / Transmitter (TX) Subsystem v2.0 (Rev. 2) - Why am I not able to see valid video when using 4096x2160 with the AXI4-Stream remapper functions enabled?

描述

Why am I not able to see valid video when using 4096x2160 with the AXI4-Stream remapper functions enabled?

The AXI4-Stream remapper is used when the following functions are enabled in the HDMI Receiver (RX) and Transmitter (TX) Subsystem v2.0 (Rev. 2) GUI.

  • Video over AXIS compliant NTSC/PAL Support
  • Video over AXIS compliant YUV420 Support

解决方案

This is a known issue in the HDMI Receiver (RX) and Transmitter (Tx) Subsystem v2.0 (Rev. 2), which will be resolved in the HDMI Receiver (RX) and Transmitter (TX) Subsystem v2.0 (Rev. 3) in Vivado 2016.4 and later.

Users can work around this by disabling the following options in the HDMI Receiver (RX) and Transmitter (TX) Subsystem v2.0 (Rev. 2) GUI at generation time.

  • Video over AXIS compliant NTSC/PAL Support
  • Video over AXIS compliant YUV420 Support

链接问答记录

主要问答记录

AR# 68317
日期 12/02/2016
状态 Active
Type 综合文章
IP
的页面