AR# 6900: V2.1i COREGEN, WVO VIEWDRAW v7.53: How to integrate CORE Generator v2.1i into the Workview Office ViewDraw menu
V2.1i COREGEN, WVO VIEWDRAW v7.53: How to integrate CORE Generator v2.1i into the Workview Office ViewDraw menu
KEYWORDS: Coregen, Viewdraw, Logiblox, menu
GENERAL DESCRIPTION: This solution record explains how you can make the 2.1i CORE Generator application (shipped in the Alliance 2.1i release) accessible from the ViewDraw v7.53 menu.
Customizing the ViewDraw menu:
1) Go to Tools->Customize 2) In the Customize Menu, enter " Coregen" in the Menu Text field 3) Enter "<path_to_Xilinx_installation>\bin\nt\viewcore.exe" in the Command field. 4) Enter $GUID in the Arguments field.
To invoke Coregen, select Tools->Coregen The Coregen dialog box will appear after a delay of about 10 seconds.
Please note the following general limitations on Viewlogic simulation support:
- Xilinx does not test the VHDL and Verilog simulation models produced by CORE Generator with the Viewlogic SpeedWave and Synopsys VCS simulators. As a result, additional manual intervention may be required to make the models work with these simulators.