AR# 69531


LogiCORE MIPI D-PHY v3.1, MIPI CSI-2 Rx Subsystem v2.2 (Rev. 1) - Why do I get warning "ncelab: *dphy_ip/mipi_dphy.srcs/sources_1/ip/mipi_dphy_rx1/mipi_dphy_rx1_core.v,436|49): implicit wire has no fanin" on system_rst_in when simulating the MIPI DPHY RX?


When I simulate the MIPI D-PHY RX or the MIPI CSI-2 RX Subsystem, why do I see the following warning?

ncelab: *W,CSINFI (/dphy_ip/mipi_dphy.srcs/sources_1/ip/mipi_dphy_rx1/mipi_dphy_rx1_core.v,436|49): implicit wire has no fanin


This issue is resolved in the MIPI D-PHY Rx v4.0 and MIPI CSI-2 RX Subsystem v3.0 in Viavdo 2017.3 and later versions.

Users can safely ignore this warning when using the MIPI D-PHY RX. 

"system_rst_in" is only used in the MIPI D-PHY TX configuration.



Answer Number 问答标题 问题版本 已解决问题的版本
54550 LogiCORE IP MIPI D-PHY - Release Notes and Known Issues for the Vivado 2015.3 tool and later versions N/A N/A
AR# 69531
日期 04/09/2018
状态 Active
Type 综合文章
People Also Viewed