UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 7024

4.2i Foundation - "ERROR:basilisk:6 - Problem encountered invoking program 'm1map'..."

Description

Keywords: m1map, basilisk, F2.1i

Urgency: Standard

General Description:
When I implement for any FPGA, the following error occurs at the beginning of the "map" phase:

"map -p xc4003e-1-pc84 -o map.ncd design.ngd design.pcf
map: version C.16
ERROR:basilisk:6 - Problem encountered invoking program "m1map".
m1map: Invalid argument."

解决方案

1

The error occurs because the path variable is not set correctly. Make sure that "%SystemRoot%\system32" is properly added to your PATH.

For example:

C:\WINNT\system32

2

For Windows 95 or Windows 98, also ensure that the PATH variable is pointing to the correct directory and is visible (to fndtn/bin/nt).

3

From (Xilinx Answer 6815):

If %XILINX% appears in the path instead of the actual install path, modify the path variable by removing %XILINX% and replacing it with the actual install path. (Please note that you must have administrative privileges to modify system variables in Windows NT.) Reboot after the path is modified.
AR# 7024
创建日期 07/14/1999
Last Updated 08/12/2003
状态 Archive
Type 综合文章