AR# 72071

|

UltraScale+ GTM Transceivers Wizard and IBERT - Master Release Notes and Known Issues

描述

This answer record contains the Release Notes and Known Issues for the UltraScale+ GTM Transceivers Wizard and IBERT and includes the following:
  • General Information
  • Known and Resolved Issues
  • Revision History

Please visit the High Speed Serial Product Page for the latest information on Xilinx High Speed Serial offerings.


Xilinx Forums:

Please seek technical support via the Serial Transceiver Board.

The Xilinx Forums are a great resource for technical support. Whether searching for answers or asking new questions, collaborate with Xilinx experts to get the solutions you need.

解决方案

General Information

Supported Devices

 

For a list of new features and added device support for all versions, see the Change Log file available with the wizard in Vivado tools.

Table 1 correlates the wizard version to the Vivado design tools release version in which it was included.

Table 1: Version

GTM Wizard VersionVivado Version
Version 1.02018.3.1
Version 1.0 (Rev. 1)
2019.1
Version 1.0 (Rev. 2)2019.1.1
Version 1.0 (Rev. 2)2019.1.2
Version 1.0 (Rev. 3)2019.1.3
Version 1.0 (Rev. 4)2019.2
Version 1.0 (Rev. 5)2019.2.1
Version 1.0 (Rev. 6)2019.2.2
Version 1.0 (Rev. 7)2020.1
Version 1.0 (Rev. 8)2020.1.1
Version 1.0 (Rev. 9)2020.2
   

Known and Resolved Issues:

Table 2 provides a list of known and resolved issues that apply to UltraScale+ GTM Transceivers Wizard.

Table 2: Known and Resolved Issues for UltraScale+ GTM Transceivers Wizard

Answer RecordTitleVersion
Found
Version
Fixed
(Xilinx Answer 72645)UltraScale+ GTM - Instructions for migrating to Vivado 2019.1.2/2019.1.32019.1.22019.1.3
(Xilinx Answer 72042)GTM Near-End PMA Loopback is not supported2018.3.12020.1
(Xilinx Answer 72073)GTM supports PAM4 data rates of 39.2 Gb/s and greater2018.3.1
2019.1.3 patch*
(Xilinx Answer 72738)UltraScale+ GTM - Example Design Reports CRITICAL WARNING: [Place 30-1219] on DMONITOROUTCLK Pin2019.1.32019.2
(Xilinx Answer 72822)Tactical Patch - GTM Wizard and IBERT IP Updates for Vivado 2019.1.32019.1.3N/A
(Xilinx Answer 73076)
UltraScale+ GTM - RXRESETMODE should be 2'b01
2019.12019.2.1
(Xilinx Answer 73537)GTM Fractional Divider Simulations can Fail at Default Simulation Rate2019.2.12020.1
(Xilinx Answer 73536)GTM Example Design Completes Test Too Early In Some Cases2019.2.12020.1

* 2019.1.3 patch is described in (Xilinx Answer 72822).

 

Table 3 provides a list of known and resolved issues that apply to UltraScale+ GTM IBERT.

 

Table 3: Known and Resolved Issues for UltraScale+ GTM IBERT

Answer RecordTitleVersion
Found
Version
Fixed
(Xilinx Answer 72467) IBERT GTM - Half of the FEC lanes show up as disabled 2019.12019.2
(Xilinx Answer 72822)Tactical Patch - GTM Wizard and IBERT IP Updates for Vivado 2019.1.32019.1.3N/A
(Xilinx Answer 75826)UltraScale+ GTM IBERT shows incorrect Error Counter and Pre-FEC BER in PRBS (RAW) mode2020.12020.2

Revision History:

03/05/2019Initial Release
03/27/2019Changed the title of (Xilinx Answer 72073)
06/26/2019Added (Xilinx Answer 72467)
08/23/2019Added (Xilinx Answer 72645)
09/09/2019Added (Xilinx Answer 72738)
10/03/2019Added (Xilinx Answer 72822)
10/09/2019Updated "Version Fixed" for 2019.1.3 releases
11/12/2019Added (Xilinx Answer 73076), included Version correlation table, and updated "Version Fixed" for 2019.2 release
03/06/2020Updated "Version Fixed" for 2019.2.1 release
05/15/2020Updated for 2020.1 Release. Added (Xilinx Answer 73537) and (Xilinx Answer 73536)
11/11/2020Added (Xilinx Answer 75826)

链接问答记录

子答复记录

AR# 72071
日期 11/24/2020
状态 Active
Type 版本说明
器件
IP
People Also Viewed