AR# 72158

|

HDMI 1.4/2.0 Receiver Subsystem 3.1 (Rev 1) - HDMI Example Design does not work with some HDMI HDR Sources when HDCP is not enabled

描述

In the HDMI 1.4/2.0 Receiver Subsystem 3.1 (Rev 1), when the Video mode is HDR, the link is not stable, and restarts every few seconds. 

What can cause the problem?

解决方案

This is a known issue in HDMI 1.4/2.0 Example design. 

It occurs on an Apple TV 4K with 4K HDR mode when HDCP is disabled.

The default EDID file in the example design does not support HDR. 

You can work around the problem by using the steps below to clone the EDID of the Sink:

  1. Connect the HDMI Transmitter to the HDMI Sink that supports HDR.
  2. Key in the HDCP Password (optional)
  3. Clone the EDID (In UART, press e, then press 2)
  4. Connect the HDMI Source to the HDMI Receiver

链接问答记录

主要问答记录

Answer Number 问答标题 问题版本 已解决问题的版本
54546 HDMI 1.4/2.0 Receiver (RX) Subsystem - Release Notes and Known Issues for the Vivado 2015.1 tool and later versions N/A N/A
AR# 72158
日期 05/29/2019
状态 Active
Type 综合文章
IP
People Also Viewed