AR# 72241

|

LogiCORE HDMI PHY Controller - Release Notes and Known Issues for Vivado 2020.1 and newer tool versions

描述

This answer record contains the Release Notes and Known Issues for the HDMI PHY Controller and includes the following:

  • 通用信息
  • 已知和已解决的问题
  • 修订历史

整个 Xilinx 社区都可在这里提供帮助,您可以提出问题并与 Xilinx 专家交流,获得所需的解决方案。

解决方案

概述

  • HDMI PHY Controller Product Guide
  • Open the Vivado software -> IP Catalog, right click on an IP and select "Compatible Families"

Supported MAC
  • HDMI 2.1 Receiver Subsystem IP (UltraScale+ device)
  • HDMI 2.1 Transmitter Subsystem IP (UltraScale+ device)
Video PHY Controller
  • HDMI 1.4/2.0 Receiver Subsystem IP (non-Versal device)
  • HDMI 1.4/2.0 Transmitter Subsystem IP (non-Versal device)
  • DisplayPort TX Subsystem IP
  • DisplayPort RX Subsystem IP
  • DisplayPort 1.4 TX Subsystem IP
  • DisplayPort 1.4 RX Subsystem IP
  • HDMI 1.4/2.0 Receiver Subsystem IP (Versal)
  • HDMI 1.4/2.0 Transmitter Subsystem IP (Versal)
  • HDMI 2.1 Receiver Subsystem IP (Versal)
  • HDMI 2.1 Transmitter Subsystem IP (Versal)
  

Subsystem 或 IP:

  • 查看 Vivado 中内核包含的更新日志。
  • 或者点击以下版本表中的更新日志链接
独立的软件驱动
  • See the Changelog included with the Doxygen Drivers in Xilinx Vitis

Linux 支持

There is no Linux driver support for the HDMI PHY Controller in Vivado 2020.1

版本表

此表将内核版本关联至首个包含该表的 Vivado 设计工具发布版本。

  

内核版本Vivado 工具版本IP 变更日志IP 补丁软件驱动程序补丁
1.0 (Rev 1)2020.1  

已知和已解决的问题

Software Driver Known issues : 

产品编号标题发现问题的版本已解决问题的版本
The CPLL/QPLL does not lock if HDMI PHY Controller is configured for RX only mode.v2.0N/A
When the design contains both Video PHY and HDMI PHY Controller, it results in unexpected behavior with application.v2.0N/A

修订历史::

 Initial Release
AR# 72241
日期 06/11/2020
状态 活跃
Type 一般类
IP
People Also Viewed