UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 7230

2.1i Design Manager - MPPR cannot be run with delay-based cleanup using the Design Manager GUI

Description

Keywords:
2.1i, mppr, multi, pass, place, and, route, delay, based, cleanup

Urgency: Standard

General Description:
When running MPPR, can we also run delay-based cleanup during each pass?

If you set the implementation options to use delay-based cleanup, and then run MPPR,
when you look at the logfile report, delay-based cleanup wasn't run, no -d option
and no mention of running delay-based cleanup.

解决方案

Use the DOS command line version of running par.
Simply cut-and-paste the MPPR command line from the MPPR report,
adding the -d option to it.
This will run MPPR with delay-based cleanup for every pass.
AR# 7230
创建日期 08/09/1999
Last Updated 04/27/2006
状态 Archive
Type 综合文章