AR# 72349


2018.3-2019.1 Zynq UltraScale+ MPSoC: Unable to mount JFFS2 filesystem with single flash configuration


When using a board with a single flash configuration, it is not possible to mount the JFFS2 filesystem (although it is still possible to boot from flash with the initramfs filesystem). 

The attached bootlogs show the process getting stuck when trying to mount the JFFS2 file system. 


Because dual-flash configuration is used by default on Xilinx evaluation boards, in PetaLinux we can only set an 8k erase block size, and cannot set the 4k erase block size that is required for single flash configuration.

There is currently no work-around in place for this issue. 

The mkfs.jffs2 command will be augmented with support for a 4K erase block size in the 2019.2 release.


文件名 文件大小 File Type
jffs2_mount_error_log_2018_3.txt 36 KB TXT
AR# 72349
日期 05/29/2019
状态 Active
Type 综合文章
Boards & Kits
People Also Viewed