We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 7542

XPLA Professional - How do I create symbols in Schematic Capture for PHDL or Verilog modules?


Keywords: XPLA, Professional, CoolRunner, fitter, PHDL, Verilog, symbol, module, ECS, Schematic, Capture

Urgency: Standard

General Description:
How do I make a block diagram-type symbols in Schematic Capture for a PHDL or Verilog module?


In the schematic editor, select ADD -> New Block Symbol. Enter the required information for the inputs and outputs, and give the new symbol the same title as the PHDL or Verilog module.

NOTE: This software package is now obsolete. There will be no future software fixes or enhancements to this product. XPLA3 designs should now use Foundation ISE or WebPACK. WebPACK is available for free at: http://www.xilinx.com/xlnx/xil_prodcat_landingpage.jsp?title=ISE=WebPack
AR# 7542
日期 08/23/2002
状态 Archive
Type 综合文章