UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 7566

XPLA Programmer - Why can't I load a JEDEC file by selecting "File ->Open"?

Description

Keywords: XPLA, PC-ISP, programmer, ISP, ISC, JTAG, CoolRunner, JEDEC, jed

Urgency: Standard

General Description:
Why can't I load a JEDEC file by selecting "File ->Open"?

解决方案

The "File" operations are only for JCD (JTAG Configuration Data) files.
This file includes the chain information, which is loaded from a previous session.
Using "File -> Open" will allow you to load this configuration file, but not a JEDEC
file.

To load a JEDEC file, double-click the field under "Design File Name" to allow you
to browse and select a JEDEC file. You must have the cable connected when
performing this operation.
AR# 7566
创建日期 09/15/1999
Last Updated 02/12/2002
状态 Archive
Type 综合文章