You are using a deprecated Browser. Internet Explorer is no longer supported by Xilinx.
XPLA Programmer - Message "Driver vicprt11 not found" appears when software finds the parts on the board.
Keywords: XPLA, PC-ISP, programmer, ISP, ISC, JTAG, CoolRunner,
error, message, warning, vicprt11, driver, board
Even though the software finds the parts on the board, the message "Driver vicprt11 not
found" appears. What does this mean?
1. Verify that the software was correctly installed. Make sure the XPLA
Programmer was installed into a 8-(or fewer)character directory
structure. Do not use spaces.
2. Verify that parallel port configuration (BIOS parallel port setting) is
set to EPP ECP. You may also need to verify that this is set properly
in the Windows Control Panel.