UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 760

FPGA Configuration: XC4000E won't configure in socket designed for XC4000?

Description

General Description:

In rare cases, you may find that an equivalent XC4000E device

does not configure when dropped into your existing XC4000 socket.

解决方案

You may encounter this problem if your design:

1. Configures in peripheral, master parallel,

or master serial mode

2. Uses one or more mode pins as signal pins, AND

3. Has pull-down resistors over 5k on one or more mode pins.

Note that all three of these criteria have to be met for

this problem to occur.

Change the high-resistance pulldowns to resistors of 5k or below.

AR# 760
创建日期 08/21/2007
Last Updated 12/15/2012
状态 Active
Type 综合文章