UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 7750

9.1i FPGA Editor - FPGA Editor routes the probe that I just added; can I route all the probes after they have all been added?

Description

As I add probes, FPGA Editor routes the probe that was just added. My design needs 30 probes added, and it takes a long time to route the individual probes before adding more. Can I route the all probes after I have added all of them?

解决方案

The work-around is to add probes without routing them by using the command line or by writing a script.  

 

The command to use to add a probe without routing it is: 

 

"probe add <netName> -targetpins <pinName1> [<pinName2>...] -noroute" 

 

This should be run from the FPGA Editor command line. 

 

To route all the probes after having added them all, use the command: "probe route -all".

AR# 7750
创建日期 08/21/2007
Last Updated 05/14/2014
状态 Archive
Type 综合文章