AR# 7759: 2.1i COREGEN, RAM, PC: CORE Generator does not respond / appears to hang when you try to generate/customize a module
AR# 7759
2.1i COREGEN, RAM, PC: CORE Generator does not respond / appears to hang when you try to generate/customize a module
描述
Keywords: coregen, hang, customize, ram, memory
Urgency: standard
General description: CORE Generator may not respond when you try to generate a module. Double-clicking on the module entry in the main GUI, or selecting a core and then clicking on Core/Customize should usually result in the cursor changing into an hour glass on the PC platform, but the GUI just hangs.
On PC platforms, this problem has been observed to be associated with systems with insufficient memory on the system. Under these conditions, the 2.1i version of CORE Generator does not issue any diagnostic messages, but simply does not respond to user input.
解决方案
Check to see whether your system has sufficient memory to run CORE Generator according to the documented recommendations in the Getting Started Guide for the Foundation or Alliance package.
CORE Generator requires a minimum of 64MB of RAM to generate most modules, and 128MB for some of the larger/more complex modules such as PDA FIR filters, square root functions, and large constant coefficient multipliers.