UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 8085

2.1i XC9500 Family Hprep6 - Create Programmable Grounds doesn't seem to work on all unused IO

Description

Keywords: 9500xl programmable ground

Urgency: Standard

General Description:
Create Programmable Grounds does not appear work on all pins.
Some unused I/Os appear to be tristated with a weak pullup
while most appear to be grounded.

解决方案

There was a bug in hprep6 that spanned all 9500/XL devices.
The situation that causes programmable grounds to fail is if a
macrocell is used, but the pin is not - then the pin is not grounded.

This is fixed in the latest version of software available at:
http://support.xilinx.com/support/techsup/sw_updates/
AR# 8085
创建日期 11/16/1999
Last Updated 08/27/2001
状态 Archive
Type 综合文章