AR# 8156

Virtex-E, Virtex-II, Spartan-II and Spartan-IIE - Are the internal 3-state outputs pull-up, pull-down, or high-Z?

描述

Are the internal 3-state outputs pull-up, pull-down, or floating?

解决方案

The 3-state outputs are pulled up. If none of the buffers are enabled, the output is a 1. 

 

For correct simulation results, you should use a PULLUP. The simulation model is a simple 3-state buffer and would not represent the pull-up unless it is instantiated into your design.

AR# 8156
日期 05/14/2014
状态 Archive
Type 综合文章