We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 8177

2.1i COREGEN, C_IP4: Known Issues in the C_IP4 IP Update


Keywords: c_ip4, coregen, fifo, nco, shift, ram, fd, register, fft, da, fir, filter, asynchronous, virtex

Urgency: standard

General Description:
Known Issues in the C_IP4 IP Update


VHDL Simulation Analyze Order:
(Xilinx Solution #6250) has been updated to indicate the order in which
the VHDL behavioral simulation models must be analyzed for this


1. 2.1i COREGEN: Main core customization GUI can be closed while Register
Options box remains open. (Xilinx Solution #6148)

Only the Serial Distributed Arithmetic FIR Filter is supported in this version of the DA
FIR Filter Core.

FFT Cores:
2. 2.1i COREGEN, VIRTEX, FFT: "WARNING: Core vfft16 did not generate product
VerilogSim." / Only VHDL simulation support is available for the Virtex FFT modules
(Xilinx Solution #8261)

3. 2.1i COREGEN, C_IP4, VIRTEX, FFT: "Generating the core will overwrite the following
files" when generating more than one FFT (Xilinx Solution #8304)

4. 2.1i COREGEN, C_IP4: "FATAL: RPM arrangement for a1/RAM_0/BIT_1 cannot be
placed in RPM arrangement for a1/RAM_0 due to resource contention." for RAM-Based
Shift Register (Xilinx Solution #8315)

5. 2.1i COREGEN, C_IP4: RAM-based SHIFT REGISTER behavioral model does not
match backannotated simulation when CE = 'X' (Xilinx Solution #8314)

Asynchronous FIFO
There are two known problems associated with the Verilog behavioral model for the
Asynchronous FIFO:

1. 2.1i COREGEN, C_IP4: Virtex ASYNCH FIFO "Port not found" error during Verilog-XL
simulation (Xilinx Solution #8372)

2. 2.1 COREGEN, VERILOG: "Too many module instance parameter assignments in
async_fifo_v1.v" (Xilinx Solution #8374)


1. The MIF files for the Block and Distributed Memories are now always written out
every time these cores are generated. If you wish to regenerate these cores using an
XCO file generated using a previous release, you will need to make sure that the "write_mif"
parameter is set to "true", otherwise generation using that XCO file will fail.

2. 2.1i COREGEN: Missing MIF file for Virtex Single and Dual Port Block RAM modules
(Xilinx Solution #7539)

3. 2.1i COREGEN, C_IP2: Virtex Variable Parallel Multiplier model shows only a 1-cycle
latency in Verilog behavioral simulation (Xilinx Solution #8233)

In addition, with the exception of the "Fixed" items noted above, the known issues
documented for the C_IP1, C_IP2 and C_IP3 releases still apply, as documented in
(Xilinx Solution #7149), (Xilinx Solution #7395), and (Xilinx Solution #7895), respectively.
AR# 8177
日期 08/24/2001
状态 Archive
Type 综合文章