UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 8229

2.1i Floorplanner - RPM is not placed correctly by MAP, and RLOC errors occur

Description

Keywords: RPM, MAP, RLOC, placement, Floorplanner, slice

Urgency: Standard

General Description:
When I open Floorplanner after the MAP step and place an RPM, the RPM is vertically aligned half a slice down from where it should be.

解决方案

To work around this, implement the design through PAR. Open Floorplanner, then highlight the RPM's name in the left (Hierarchical) window.

From Placement, choose the Floorplanner -> Constrain option. This will bring the properly placed RPM to the front sheet, and you can place it normally.
AR# 8229
创建日期 08/31/2007
Last Updated 07/09/2001
状态 Archive
Type ??????