We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!


AR# 8304

2.1i COREGEN, C_IP4, VIRTEX, FFT: "Generating the core will overwrite the following [xdsp_xxxx.edn] files" when generating more than one FFT


Keywords: overwrite, fft, virtex, c_ip4, coregen

Urgency: standard

General Description:
A pop-up dialog titled "Overwrite Files" may be seen when generating more than one FFT
in the same CORE Generator project directory. The full message text is:

"Generating the core will overwrite the following files. Select "Overwrite Files" to
overwrite the files or "Cancel" to abort.


This should not be cause for concern.

The 16-point, 64-point, 256-point and 1024 point FFTs are built up using a hierarchy of
common EDIF building blocks which all share the naming convention, "xdsp_xxxxxx.edn".

For all FFTs generated after the first one in a given project, you can expect to see a warning
message like this. You should simply allow CORE Generator to overwrite the pre-existing .EDN files.
AR# 8304
日期 08/01/2001
状态 Archive
Type 综合文章