UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 8433

4.2i Foundation - How do I print a Foundation schematic to a postscript (.ps) file in a Windows environment?

Description


General Description:

How do I print a Foundation schematic to a postscript (.ps) file in a Windows environment?

解决方案


Setting up the printer:



1. Be sure you have drivers for a postscript printer; the Windows CDs contains with the appropriate drivers.

2. Go to Start -> Settings -> Printers.

3. Double-click "Add Printer".

4. Set up a local printer by selecting "My Computer" in the printer setup window and clicking "Next".

5. In the available ports listing, choose "File" and click "Next".

6. Choose your printer of choice out of the list, and continue setup.



Printing:



1. From the Foundation Schematic Editor, change your printer through File -> Printer Setup.

2. Select your new printer and click "OK".

3. Print your schematic by selecting File -> Print.

4. Instead of printing to a printer, a pop-up window will request a destination and a name for your .ps file.

5. Enter the complete path and the complete name, including the file extension.
AR# 8433
创建日期 09/01/2007
Last Updated 09/23/2011
状态 Archive
Type 综合文章