UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 8572

3.1i Virtex-E MAP - MAP outputs incorrect message when processing invalid Virtex LOC constraints.

Description

Keywords: 2.1i, Virtex-E, DLL, LOC, PROHIBIT, xvkpc:2, match

Urgency: Standard

General Description:
The Virtex-E parts have eight DLLs rather than the four found in Virtex parts. The site names for the Virtex-E DLLs have the naming convention "DLL1P" and "DLL1S" (rather than the "DLL1" seen in Virtex parts), so DLL locate constraints must be modified before a Virtex design is re-targeted to Virtex-E.

If an invalid DLL LOC constraint is used, MAP prints an incorrect message to the report file and ignores the constraint. The message looks like this:

WARNING:xvkpc:2 - PROHIBIT site "DLL1" does not match any site in this package.

解决方案

This problem can be avoided by using the correct DLL site names for the LOC constraints.
AR# 8572
创建日期 02/08/2000
Last Updated 08/19/2002
状态 Archive
Type 综合文章