UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 8598

4.1i FPGA Editor - When Block Editor is used, are the "Feqn" and "Geqn" equations case-sensitive?

Description

Keywords: FPGA Editor, Feqn, Geqn, case, sensitive, Block Editor, 3.1i

Urgency: Standard

General Description:
I am trying to modify the equations for Feqn or Geqn with Block Editor -- are the equations are case-sensitive?

解决方案

The equations for Feqn and Geqn are not case-sensitive; the equations are based upon a letter/number combination. Depending on the device family, the letter can either be F, G, H, or A, and the number can either be 1, 2, 3, or 4.

Use the corresponding letter/number value for the following families:

2000/3000/4000/5200/Spartan/Spartan-XL:

Feqn -> F1...F4
Geqn -> G1...G4
Heqn -> H1...H4

Virtex/Virtex-E:

Feqn -> A1...A4
Geqn -> A1...A4

This issue will be addressed in a future software release.
AR# 8598
创建日期 02/11/2000
Last Updated 10/08/2003
状态 Archive
Type 综合文章