UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 8634

3.1i XFLOW - ERROR:Xflow:13 - Partname not found in design when using XNF netlist

Description

Keywords: XFLOW, XFlow, Xflow, partname, xnf, smart mode

Urgency: Standard

General Description:
XFLOW successfully locates and uses the part name for an XNF netlist when
processing the design for the first time. However, subsequent runs of XFLOW
on the XNF netlist fail with the error:

ERROR:Xflow:13 - Partname not found in design. Partname should be
specified either in the design or on the command line.

解决方案

1

This problem only occurs when using the Smart Mode feature of XFLOW on
an XNF netlist design. Specifically, XFLOW is run without specifying the .XNF
file extension for the input netlist.

The resolution is to specify the part name on the XFLOW command line using
the -p option:

xflow -p <partname> <additional_options> <design>

2

The problem will not occur if you do not use the Smart Mode feature of XFLOW. To do this, run XFLOW with the .XNF file extension for the input netlist specified on the command line:

xflow <options> <design>.xnf
AR# 8634
创建日期 02/16/2000
Last Updated 12/07/2004
状态 Archive
Type 综合文章