UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 8650

3.1i COREGEN USER GUIDE - "SETPROJECT" command does not work in an XCO file

Description

Keywords: core generator, command file, project

Urgency: standard

General Description:
The SETPROJECT command currently cannot be used within
an XCO file to specify the CORE Generator project in which you want
to generate a core.

解决方案

If you want to generate a core in a particular project directory using
a pre-existing XCO file, you must set up that directory as a
CORE Generator project directory beforehand from the CORE Generator
GUI.

After the CORE Generator project has been set up in this manner,
you can also nvoke the CORE Generator in command line mode with
a -p <project_directory> option to point to the CORE Generator
project.

Example: coregen -p <Coregen_project_directory>
AR# 8650
创建日期 02/22/2000
Last Updated 08/23/2002
状态 Archive
Type 综合文章