UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 8770

3.1i XFLOW - The constraints file (.ucf) in the current directory is not used

Description

Keywords: XFLOW, .ucf, working directory, current directory

Urgency: Standard

General Description:
XFLOW does not use the constraints file (.ucf) located in the current directory if the "-wd" option is used to specify a wokring directory that is different from the current directory.

解决方案

The "-wd" option is specifies the location of the working directory for XFLOW; this defines where XFLOW and all sub-programs run. If a UCF file is located in a directory that is different from the working directory, it is not automatically used.

To ensure that a UCF constraints file is used by the tools, edit the options file (.opt) and specify the "-uc" option in the NGDBuild program block. The "-uc" option should point to a fully hierarchical path for the UCF constraints file.

This problem was fixed in the 4.1i release.
AR# 8770
创建日期 08/31/2007
Last Updated 06/13/2002
状态 Archive
Type ??????