UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 894

Gen_sch8 5.x fails on Solaris with "crt1:bad open" or "libbase: can't open file"

Description

Keywords: gen_sch8, solaris, error, mentor

Urgency: Standard

General Description:

Gen_sch8 will halt with an error similar to the following if run on a
Solaris machine:

(Solaris 2.4)
crt1:bad [02] open: /tools/mentor/lib/mgc_ld.so
Abort - core dumped

(Solaris 2.5)
ld.so.1: (unknown): fatal: libbase_lib.so.14.0: can't open file: errno=2
Killed

This is because Gen_sch8 was compiled native to SunOS.

解决方案

A Solaris-native version of Gen_sch8 does not currently exist. There is no
fix available at this time.

If you are running Gen_sch8 as part of the Fncsim8 or Timsim8 flow on a
design which contains either XBLOX or XABEL components, you can work around
the problem by redrawing your schematic without XBLOX or XABEL modules.
AR# 894
创建日期 08/31/2007
Last Updated 10/01/2008
状态 Archive
Type 综合文章