UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 8995

*Obsolete* 3.1i JTAG Programmer - "Reset Cable" followed by "Initialize Chain" using Xchecker cable causes Dr. Watson crash

Description

Keywords: JTAG Programmer, Dr. Watson, core dump, crash, initialize, jtag, xchecker, nt

Urgency: Standard

General Description:
When using 3.1i JTAG Programmer software with the Xchecker cable, the software might crash when the following sequence is executed on Windows NT.

Chain Initialize -> Reset Cable -> Chain Initialize

解决方案

When using the xchecker cable and you have modified the composition of your boundary-scan chain it is recommended that you restart JTAG Programmer
rather than using the Reset Cable operation to re-initialize the application.
AR# 8995
创建日期 08/31/2007
Last Updated 09/26/2005
状态 Archive
Type 综合文章