UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 905

Mentor/EDIF2XNF: purple LOC properties on PADs are lost, gold properties are fine

Description

Keywords: edif2xnf, properites missing

Urgency: standard

General Description:

Some LOC properties on the pads in my design are not passed to subsequent
stages in the design compilation. I've noticed that these LOC properties
are displayed as purple text in Design Architect, instead of the normal
gold color. What does this mean?

解决方案

A purple property in Design Architect means that the property is attached
to the pin on the PAD symbol, whereas a gold property means that it is
attached to the net attached to the pin. Because the PAD symbols in the
Mentor libraries are defined as ports, any properties attached to these
symbols (i.e., shown in purple) will not be passed to the EDIF file during
Men2XNF8, and thus will not be passed to subsequent stages of the
compilation.

Usually, LOC properties on Xilinx PAD symbols will transfer to the attached
net and will therefore appear gold; however, somethimes the property gets
stuck on the PAD pin. Unfortunately, it is not clearly understood why this
happens (or even what circumstances cause it to happen), and the only sure
workaround is to select the next vertex connected to the offending pin,
then add the LOC property to the net vertex. This new property should show
up in gold, and thus will be passed to the compilation tools. In any case,
beware of purple LOC properties!
AR# 905
创建日期 08/31/2007
Last Updated 10/01/2008
状态 Archive
Type 综合文章