We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 9291

3.1i Foundation ISE: ngdanno output is not displayed in the transcript window


Keywords: Project Navigator, log, console, ngdanno

Urgency: Standard

General Description: When the "Simulate Post Route HDL Model"
is run, ngdanno and ngd2vhdl or ngd2ver is run to create a timing
simulation netlist. The output of ngdanno is not written to the console


The only way to get this information is by running ngdanno at a dos

1- Open a dos prompt and CD to the project directory.
2- Open the automake.log file and search for ngdanno.
3- In the dos prompt, enter the ngdanno command. For
example: ngdanno -o <file>.nga <file>.ncd > ngdout

This will place the output of ngdanno in a file called: ngdout.
AR# 9291
日期 01/16/2003
状态 Archive
Type 综合文章