UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 9444

3.1i Install - Foundation / ISE Install - Synopsys Error: "Cannot run process... regsvr32.exe... dpmw.dll"

描述

Keywords: FISE, install, regserv32, dpmw.dll, error, process, Synopsis

Urgency: Hot

General Description:
The following error has been seen on Windows environments at the end of the
Synopsys install:

Error :- Cannot run process - C:\Xilinx\express\bin-win32i\regsvr32.exe /s
c:\Xilinx\express\bin-win32i\dpmw.dll

This command registers the dpmw.dll file for use by ISE.

解决方案

This can occur if the registry cannot be updated at the end of the installation. The following
steps will allow you to manually complete the Registry process:

1. Open a DOS prompt.
2. Change to the XILINX\express\bin-win32i directory.
3. Enter the following command: "regsvr32.exe dpmw.dll"
4. Reboot your computer.
AR# 9444
日期 09/17/2002
状态 Archive
Type 综合文章
的页面