UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 9467

14.x Timing Analyzer - Can I re-run Timing Analyzer with modified timing constraints to obtain an updated timing report?

Description

Is it possible to re-run PAR, after modifying the constraints, in order to obtain an updated static timing analysis report?

解决方案

The constraints are annotated into the design during the translate step (NGDBuild). Therefore, any time constraints are changed, the implementation flow should be re-run starting from "Translate," in order to obtain an updated timing report.
AR# 9467
创建日期 08/21/2007
Last Updated 12/15/2012
状态 Active
Type 综合文章
Tools
  • ISE - 10.1
  • ISE Design Suite - 11.1
  • ISE Design Suite - 11.2
  • More
  • ISE Design Suite - 11.3
  • ISE Design Suite - 11.4
  • ISE Design Suite - 11.5
  • ISE Design Suite - 12.1
  • ISE Design Suite - 12.2
  • ISE Design Suite - 12.3
  • ISE Design Suite - 12.4
  • ISE Design Suite - 13
  • ISE Design Suite - 13.1
  • ISE Design Suite - 13.2
  • ISE Design Suite - 13.3
  • ISE Design Suite - 13.4
  • ISE Design Suite - 14.1
  • Less