UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 9536

3.1i Virtex-E MAP - Crash after "Running Directed Packing..." due to incorrect MUXF5 trimming.

Description

Keywords: crash, Running Directed Packing, F5MUX, MUXF5

Urgency: Standard

Problem Description:
A case has been seen where a MAP crash was caused by the
incorrect trimming of a MUXF5. The MUXF5 output signal is
trimmed because it feeds the I1 input of a MUXF6 whose select
is tied to ground (MUXF6 is a route-thru) and this makes the I1
input redundant. Thus, a MUXF5 with no output is fed to the
packer, and this causes the packer core dump.

(This MAP crash reproduces in Ds1 and DQA on both PC and Solaris.)

解决方案

This problem is fixed in the latest 3.1i Service Pack available at:
http://support.xilinx.com/support/techsup/sw_updates/
AR# 9536
创建日期 06/20/2000
Last Updated 08/19/2002
状态 Archive
Type 综合文章