UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 9540

4.2i Foundation - In Windows 98, a "File Error" is reported after I attach graphics in Schematic Capture

Description

Keywords: Windows 98, file, error, graphics, table, setup, WMF, metafile, logo, schematic

Urgency: Standard

General Description:
I am using Windows 98/SE, and I specify a Logo Metafile in Schematic Capture. When I subsequently launch the schematics, the following Windows error is reported:

"File Error: Windows cannot find <...>.wmf. Check the path and file name, and then try again."

解决方案

The message will be posted twice; after you click "OK", the Logo Metafile will load correctly.
AR# 9540
创建日期 06/21/2000
Last Updated 08/12/2003
状态 Archive
Type 综合文章