UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 9591

3.1i Virtex MAP - A crash occurs if a MAP message is too long (more than 6000 characters).

Description

Keywords: MAP, crash, modular, assembly, message

Urgency: Standard

General Description:
Cases have been seen where MAP crashes while attempting to print a very long
message. The error can occur anytime messages are printed.

解决方案

This problem is caused by a failure in the message manager when very long messages
(greater than 6000 characters) are generated. Two known causes of this problem are:

1. Identical MAP constraints (RLOC, BLKNM, LOC) that are incorrectly applied
to a large number of symbols will lead to a very long pack error message,
causing the crash.

2. Valid Modular Design cases have been known to generate messages that
were long enough to cause this crash.

This problem is scheduled to be fixed in the next major release after
3.1i, which is currently scheduled for July, 2001.
AR# 9591
创建日期 06/27/2000
Last Updated 08/19/2002
状态 Archive
Type 综合文章