UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 9645

*Obselete* 3.1i XC1800 JTAG Programmer - XC1804 remains in ISP mode after operation has finished

Description

Keywords: 1800, isp, done, fail

Urgency: Standard

General Description:

These operations cause the XC1804 to enter ISP mode, but never execute a NORMRST to return the device to normal operational mode:

- Get Signature/USERCODE (Should never enter ISPEN mode for this operation.)
- Calculate Checksum
- Blank Check (upon failure because device is actually configured)

解决方案

This is changed in the latest 3.1i Service Pack available at:
http://support.xilinx.com/support/techsup/sw_updates/
AR# 9645
创建日期 07/05/2000
Last Updated 09/30/2003
状态 Archive
Type 综合文章