UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 9677

3.1i Floorplanner - An RPM cannot be placed in a floorplan

描述

Keywords: 3.1i, Floorplanner, place, RPM

Urgency: Standard

General Description:
In the 3.1i Floorplanner, some RPMs (Relationally Placed Macros) cannot be placed onto a floorplan; when I attempt to place the RPM (in a valid location), the tool displays the "No" symbol (a circle with a slash through the center).

解决方案

To work around this problem, highlight the RPM in the hierarchy window and select Pattern -> Unbind. Then, drag the RPM components onto the floorplan window and place them. Finally, with the RPM highlighted, select Pattern -> Bind. This method will not affect the RPM structure and allows the RPM to be placed in the floorplan.

This issue was fixed in the 4.1i software.
AR# 9677
日期 11/24/2002
状态 Archive
Type ??????
的页面