UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 977

FLOORPLANNER-XACT: Unable to load file <design>.lca / FPLAN : ERROR 1576 : Error in LCA file

Description

Keywords: Xact, Floorplanner, Error 1576

Urgency: Low

Description: The design is mapped, placed and routed without any appearent problems. The <design>.lca file appears to be correct (ie. passes DRC, able to make bitstream, able to load design in editLCA). When entering the floorplanner the <design>.map file is read in without any problems, but when attempting to Read Placed Design floorplanner reports :

Unable to load file <design>.lca

Upon further investigation into the fplan.log file, the following error is reported :

*** FPLAN: ERROR 1576:
Error in LCA file: Block in Intnet statement is not previously defined,
or the statement does not contain one of the following: {F, G, H, PAD,
M, QY, QX}
on line <line number> of file "<design>.lca"
"<Line in .lca file>"
-------------------^
This is an internal error; please contact Xilinx support personnel.

A possible cause of this error is a pad or net with one of the following names : TCK, TDI, TMS, MD0, MD1, MD2, or TDO. Also can be caused if a bus is labeled MD[x:0].

These are special purpose input/output pad names and may cause problems with floorplanner if a net in the design has one or more of these names.

解决方案

Change the name of any nets in the design with the following names : TCK, TDI, TMS, MD0, MD1, MD2, TDO or buses labeled MD[x:0]. Please follow standard naming conventions outlined in the XACT manuals when changing net names.
AR# 977
创建日期 08/31/2007
Last Updated 05/24/1999
状态 Archive
Type ??????