UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 9821

3.1i XST - "Memory Full, Done: failed with exit code: 0003. errors"

Description

Keywords: Memory, Full, exit, code, 0003, sll, srl, shift, operator

Urgency: Standard

General Description:
The following errors may show in Foundation ISE when using the VHDL operators "sll" (shift left logical) or "srl" (shift right logical):

Memory Full, Done: failed with exit code: 0003.

解决方案

The above errors have been seen when a negative number has been used for the shift value. For example:

q <= d sll -3;

where "q" and "d" are bit_vectors.

This problem is fixed in the latest 3.1i Service Pack, available at:
http://support.xilinx.com/support/techsup/sw_updates.
The first service pack containing the fix is 3.1i Service Pack 3.
AR# 9821
创建日期 08/01/2000
Last Updated 08/20/2002
状态 Archive
Type 综合文章