We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 9912

3.1i NGDBuild - "WARNING:nd300 - The signal(s) '<signal_name>' are in combinational feedback"


Keywords: NOREDUCE, VHDL, Verilog, HDL, loop, ignore

Urgency: Standard

General Description:
NGDBuild issues the following warning when signals are in a combinatorial loop:

"WARNING:nd300 - The signal(s) 'N108, N111' are in combinational feedback loops. These signals may cause hazards/glitches. Logic should include hazard reduction circuitry to avoid hazards/glitches. Apply the NOREDUCE parameter to the hazard reduction circuitry."

Even after applying the NOREDUCE attribute through my HDL in XST, XST appears to ignore the attribute.


This is a known problem in XST. To work around this issue, flatten the hierarchy during the synthesis process:

1. Right-click on "Synthesize".
2. Select "Properties".
3. Select the "Synthesis Options" tab.
4. Check the "Flatten Hierarchy" box.
5. Click the "OK" button.

The NOREDUCE attribute will now work when you run your design.
AR# 9912
日期 04/29/2003
状态 Archive
Type 综合文章