We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!


AR# 9969

Virtex/Virtex-E - Do the Virtex/Virtex-E mode pins need LVTTL Vcco on their bank during configuration?


The Virtex-E Data Sheet states that all configuration pins need to have a Vcco of 3.3V to permit LVTTL operation. Does this apply to the mode pins as well, as they are on a different bank than the rest of the pins?


No. The Mode Pins do not need the bank to be at any specific Vcco.

AR# 9969
日期 12/15/2012
状态 Active
Type 综合文章