Overview

Vector MAC combined with vector comparisons with 32 bit real by 32 bit real

Functions
v4acc80	lmac4_abs (v4acc80 acc, v32int32 xbuff, int xstart, unsigned int xoffsets, int xstep, v8int32 zbuff, int zstart, unsigned int zoffsets, int zstep)
	Multiply-accumulate intrinsic function after computing the absolute value in the selected lanes from the input buffer .

v4acc80	lmac4_abs (v4acc80 acc, v16int32 xbuff, int xstart, unsigned int xoffsets, int xstep, v8int32 zbuff, int zstart, unsigned int zoffsets, int zstep)
	Multiply-accumulate intrinsic function after computing the absolute value in the selected lanes from the input buffer using small X input buffer.

v4acc80	lmac4_max (v4acc80 acc, v32int32 xbuff, int xstart, unsigned int xoffsets, int xstep, int ystart, v8int32 zbuff, int zstart, unsigned int zoffsets, int zstep)
	Multiply-accumulate intrinsic function after computing the maximum between the selected lanes from the input buffer .

v4acc80	lmac4_max (v4acc80 acc, v16int32 xbuff, int xstart, unsigned int xoffsets, int xstep, int ystart, v8int32 zbuff, int zstart, unsigned int zoffsets, int zstep)
	Multiply-accumulate intrinsic function after computing the maximum between the selected lanes from the input buffer using small X input buffer.

v4acc80	lmac4_max (v4acc80 acc, v16int32 xbuff, int xstart, unsigned int xoffsets, int xstep, v16int32 ybuff, int ystart, v8int32 zbuff, int zstart, unsigned int zoffsets, int zstep)
	Multiply-accumulate intrinsic function after computing the maximum between the selected lanes from the input buffer using small X input buffer.

v4acc80	lmac4_maxdiff (v4acc80 acc, v32int32 xbuff, int xstart, unsigned int xoffsets, int xstep, int ystart, v8int32 zbuff, int zstart, unsigned int zoffsets, int zstep)
	Multiply-accumulate intrinsic function after computing the maximum difference between the selected lanes from the input buffer .

v4acc80	lmac4_maxdiff (v4acc80 acc, v16int32 xbuff, int xstart, unsigned int xoffsets, int xstep, int ystart, v8int32 zbuff, int zstart, unsigned int zoffsets, int zstep)
	Multiply-accumulate intrinsic function after computing the maximum difference between the selected lanes from the input buffer using small X input buffer.

v4acc80	lmac4_maxdiff (v4acc80 acc, v16int32 xbuff, int xstart, unsigned int xoffsets, int xstep, v16int32 ybuff, int ystart, v8int32 zbuff, int zstart, unsigned int zoffsets, int zstep)
	Multiply-accumulate intrinsic function after computing the maximum difference between the selected lanes from the input buffer using small X input buffer.

v4acc80	lmac4_min (v4acc80 acc, v32int32 xbuff, int xstart, unsigned int xoffsets, int xstep, int ystart, v8int32 zbuff, int zstart, unsigned int zoffsets, int zstep)
	Multiply-accumulate intrinsic function after computing the minimum between the selected lanes from the input buffer .

v4acc80	lmac4_min (v4acc80 acc, v16int32 xbuff, int xstart, unsigned int xoffsets, int xstep, int ystart, v8int32 zbuff, int zstart, unsigned int zoffsets, int zstep)
	Multiply-accumulate intrinsic function after computing the minimum between the selected lanes from the input buffer using small X input buffer.

v4acc80	lmac4_min (v4acc80 acc, v16int32 xbuff, int xstart, unsigned int xoffsets, int xstep, v16int32 ybuff, int ystart, v8int32 zbuff, int zstart, unsigned int zoffsets, int zstep)
	Multiply-accumulate intrinsic function after computing the minimum between the selected lanes from the input buffer using small X input buffer.

v8acc80	lmac8_abs (v8acc80 acc, v32int32 xbuff, int xstart, unsigned int xoffsets, v8int32 zbuff, int zstart, unsigned int zoffsets)
	Multiply-accumulate intrinsic function after computing the absolute value in the selected lanes from the input buffer .

v8acc80	lmac8_abs (v8acc80 acc, v16int32 xbuff, int xstart, unsigned int xoffsets, v8int32 zbuff, int zstart, unsigned int zoffsets)
	Multiply-accumulate intrinsic function after computing the absolute value in the selected lanes from the input buffer using small X input buffer.

v8acc80	lmac8_max (v8acc80 acc, v32int32 xbuff, int xstart, unsigned int xoffsets, int ystart, v8int32 zbuff, int zstart, unsigned int zoffsets)
	Multiply-accumulate intrinsic function after computing the maximum between the selected lanes from the input buffer .

v8acc80	lmac8_max (v8acc80 acc, v16int32 xbuff, int xstart, unsigned int xoffsets, int ystart, v8int32 zbuff, int zstart, unsigned int zoffsets)
	Multiply-accumulate intrinsic function after computing the maximum between the selected lanes from the input buffer using small X input buffer.

v8acc80	lmac8_max (v8acc80 acc, v16int32 xbuff, int xstart, unsigned int xoffsets, v16int32 ybuff, int ystart, v8int32 zbuff, int zstart, unsigned int zoffsets)
	Multiply-accumulate intrinsic function after computing the maximum between the selected lanes from the input buffer using small X input buffer.

v8acc80	lmac8_maxdiff (v8acc80 acc, v32int32 xbuff, int xstart, unsigned int xoffsets, int ystart, v8int32 zbuff, int zstart, unsigned int zoffsets)
	Multiply-accumulate intrinsic function after computing the maximum difference between the selected lanes from the input buffer .

v8acc80	lmac8_maxdiff (v8acc80 acc, v16int32 xbuff, int xstart, unsigned int xoffsets, int ystart, v8int32 zbuff, int zstart, unsigned int zoffsets)
	Multiply-accumulate intrinsic function after computing the maximum difference between the selected lanes from the input buffer using small X input buffer.

v8acc80	lmac8_maxdiff (v8acc80 acc, v16int32 xbuff, int xstart, unsigned int xoffsets, v16int32 ybuff, int ystart, v8int32 zbuff, int zstart, unsigned int zoffsets)
	Multiply-accumulate intrinsic function after computing the maximum difference between the selected lanes from the input buffer using small X input buffer.

v8acc80	lmac8_min (v8acc80 acc, v32int32 xbuff, int xstart, unsigned int xoffsets, int ystart, v8int32 zbuff, int zstart, unsigned int zoffsets)
	Multiply-accumulate intrinsic function after computing the minimum between the selected lanes from the input buffer .

v8acc80	lmac8_min (v8acc80 acc, v16int32 xbuff, int xstart, unsigned int xoffsets, int ystart, v8int32 zbuff, int zstart, unsigned int zoffsets)
	Multiply-accumulate intrinsic function after computing the minimum between the selected lanes from the input buffer using small X input buffer.

v8acc80	lmac8_min (v8acc80 acc, v16int32 xbuff, int xstart, unsigned int xoffsets, v16int32 ybuff, int ystart, v8int32 zbuff, int zstart, unsigned int zoffsets)
	Multiply-accumulate intrinsic function after computing the minimum between the selected lanes from the input buffer using small X input buffer.

v4acc80	lmsc4_abs (v4acc80 acc, v32int32 xbuff, int xstart, unsigned int xoffsets, int xstep, v8int32 zbuff, int zstart, unsigned int zoffsets, int zstep)
	Multiply-subtract intrinsic function after computing the absolute value in the selected lanes from the input buffer .

v4acc80	lmsc4_abs (v4acc80 acc, v16int32 xbuff, int xstart, unsigned int xoffsets, int xstep, v8int32 zbuff, int zstart, unsigned int zoffsets, int zstep)
	Multiply-subtract intrinsic function after computing the absolute value in the selected lanes from the input buffer using small X input buffer.

v4acc80	lmsc4_max (v4acc80 acc, v32int32 xbuff, int xstart, unsigned int xoffsets, int xstep, int ystart, v8int32 zbuff, int zstart, unsigned int zoffsets, int zstep)
	Multiply-subtract intrinsic function after computing the maximum between the selected lanes from the input buffer .

v4acc80	lmsc4_max (v4acc80 acc, v16int32 xbuff, int xstart, unsigned int xoffsets, int xstep, int ystart, v8int32 zbuff, int zstart, unsigned int zoffsets, int zstep)
	Multiply-subtract intrinsic function after computing the maximum between the selected lanes from the input buffer using small X input buffer.

v4acc80	lmsc4_max (v4acc80 acc, v16int32 xbuff, int xstart, unsigned int xoffsets, int xstep, v16int32 ybuff, int ystart, v8int32 zbuff, int zstart, unsigned int zoffsets, int zstep)
	Multiply-subtract intrinsic function after computing the maximum between the selected lanes from the input buffer using small X input buffer.

v4acc80	lmsc4_maxdiff (v4acc80 acc, v32int32 xbuff, int xstart, unsigned int xoffsets, int xstep, int ystart, v8int32 zbuff, int zstart, unsigned int zoffsets, int zstep)
	Multiply-subtract intrinsic function after computing the maximum difference between the selected lanes from the input buffer .

v4acc80	lmsc4_maxdiff (v4acc80 acc, v16int32 xbuff, int xstart, unsigned int xoffsets, int xstep, int ystart, v8int32 zbuff, int zstart, unsigned int zoffsets, int zstep)
	Multiply-subtract intrinsic function after computing the maximum difference between the selected lanes from the input buffer using small X input buffer.

v4acc80	lmsc4_maxdiff (v4acc80 acc, v16int32 xbuff, int xstart, unsigned int xoffsets, int xstep, v16int32 ybuff, int ystart, v8int32 zbuff, int zstart, unsigned int zoffsets, int zstep)
	Multiply-subtract intrinsic function after computing the maximum difference between the selected lanes from the input buffer using small X input buffer.

v4acc80	lmsc4_min (v4acc80 acc, v32int32 xbuff, int xstart, unsigned int xoffsets, int xstep, int ystart, v8int32 zbuff, int zstart, unsigned int zoffsets, int zstep)
	Multiply-subtract intrinsic function after computing the minimum between the selected lanes from the input buffer .

v4acc80	lmsc4_min (v4acc80 acc, v16int32 xbuff, int xstart, unsigned int xoffsets, int xstep, int ystart, v8int32 zbuff, int zstart, unsigned int zoffsets, int zstep)
	Multiply-subtract intrinsic function after computing the minimum between the selected lanes from the input buffer using small X input buffer.

v4acc80	lmsc4_min (v4acc80 acc, v16int32 xbuff, int xstart, unsigned int xoffsets, int xstep, v16int32 ybuff, int ystart, v8int32 zbuff, int zstart, unsigned int zoffsets, int zstep)
	Multiply-subtract intrinsic function after computing the minimum between the selected lanes from the input buffer using small X input buffer.

v8acc80	lmsc8_abs (v8acc80 acc, v32int32 xbuff, int xstart, unsigned int xoffsets, v8int32 zbuff, int zstart, unsigned int zoffsets)
	Multiply-subtract intrinsic function after computing the absolute value in the selected lanes from the input buffer .

v8acc80	lmsc8_abs (v8acc80 acc, v16int32 xbuff, int xstart, unsigned int xoffsets, v8int32 zbuff, int zstart, unsigned int zoffsets)
	Multiply-subtract intrinsic function after computing the absolute value in the selected lanes from the input buffer using small X input buffer.

v8acc80	lmsc8_max (v8acc80 acc, v32int32 xbuff, int xstart, unsigned int xoffsets, int ystart, v8int32 zbuff, int zstart, unsigned int zoffsets)
	Multiply-subtract intrinsic function after computing the maximum between the selected lanes from the input buffer .

v8acc80	lmsc8_max (v8acc80 acc, v16int32 xbuff, int xstart, unsigned int xoffsets, int ystart, v8int32 zbuff, int zstart, unsigned int zoffsets)
	Multiply-subtract intrinsic function after computing the maximum between the selected lanes from the input buffer using small X input buffer.

v8acc80	lmsc8_max (v8acc80 acc, v16int32 xbuff, int xstart, unsigned int xoffsets, v16int32 ybuff, int ystart, v8int32 zbuff, int zstart, unsigned int zoffsets)
	Multiply-subtract intrinsic function after computing the maximum between the selected lanes from the input buffer using small X input buffer.

v8acc80	lmsc8_maxdiff (v8acc80 acc, v32int32 xbuff, int xstart, unsigned int xoffsets, int ystart, v8int32 zbuff, int zstart, unsigned int zoffsets)
	Multiply-subtract intrinsic function after computing the maximum difference between the selected lanes from the input buffer .

v8acc80	lmsc8_maxdiff (v8acc80 acc, v16int32 xbuff, int xstart, unsigned int xoffsets, int ystart, v8int32 zbuff, int zstart, unsigned int zoffsets)
	Multiply-subtract intrinsic function after computing the maximum difference between the selected lanes from the input buffer using small X input buffer.

v8acc80	lmsc8_maxdiff (v8acc80 acc, v16int32 xbuff, int xstart, unsigned int xoffsets, v16int32 ybuff, int ystart, v8int32 zbuff, int zstart, unsigned int zoffsets)
	Multiply-subtract intrinsic function after computing the maximum difference between the selected lanes from the input buffer using small X input buffer.

v8acc80	lmsc8_min (v8acc80 acc, v32int32 xbuff, int xstart, unsigned int xoffsets, int ystart, v8int32 zbuff, int zstart, unsigned int zoffsets)
	Multiply-subtract intrinsic function after computing the minimum between the selected lanes from the input buffer .

v8acc80	lmsc8_min (v8acc80 acc, v16int32 xbuff, int xstart, unsigned int xoffsets, int ystart, v8int32 zbuff, int zstart, unsigned int zoffsets)
	Multiply-subtract intrinsic function after computing the minimum between the selected lanes from the input buffer using small X input buffer.

v8acc80	lmsc8_min (v8acc80 acc, v16int32 xbuff, int xstart, unsigned int xoffsets, v16int32 ybuff, int ystart, v8int32 zbuff, int zstart, unsigned int zoffsets)
	Multiply-subtract intrinsic function after computing the minimum between the selected lanes from the input buffer using small X input buffer.

v4acc80	lmul4_abs (v32int32 xbuff, int xstart, unsigned int xoffsets, int xstep, v8int32 zbuff, int zstart, unsigned int zoffsets, int zstep)
	Multiply intrinsic function after computing the absolute value in the selected lanes from the input buffer .

v4acc80	lmul4_abs (v16int32 xbuff, int xstart, unsigned int xoffsets, int xstep, v8int32 zbuff, int zstart, unsigned int zoffsets, int zstep)
	Multiply intrinsic function after computing the absolute value in the selected lanes from the input buffer using small X input buffer.

v4acc80	lmul4_max (v32int32 xbuff, int xstart, unsigned int xoffsets, int xstep, int ystart, v8int32 zbuff, int zstart, unsigned int zoffsets, int zstep)
	Multiply intrinsic function after computing the maximum between the selected lanes from the input buffer .

v4acc80	lmul4_max (v16int32 xbuff, int xstart, unsigned int xoffsets, int xstep, int ystart, v8int32 zbuff, int zstart, unsigned int zoffsets, int zstep)
	Multiply intrinsic function after computing the maximum between the selected lanes from the input buffer using small X input buffer.

v4acc80	lmul4_max (v16int32 xbuff, int xstart, unsigned int xoffsets, int xstep, v16int32 ybuff, int ystart, v8int32 zbuff, int zstart, unsigned int zoffsets, int zstep)
	Multiply intrinsic function after computing the maximum between the selected lanes from the input buffer using small X input buffer.

v4acc80	lmul4_maxdiff (v32int32 xbuff, int xstart, unsigned int xoffsets, int xstep, int ystart, v8int32 zbuff, int zstart, unsigned int zoffsets, int zstep)
	Multiply intrinsic function after computing the maximum difference between the selected lanes from the input buffer .

v4acc80	lmul4_maxdiff (v16int32 xbuff, int xstart, unsigned int xoffsets, int xstep, int ystart, v8int32 zbuff, int zstart, unsigned int zoffsets, int zstep)
	Multiply intrinsic function after computing the maximum difference between the selected lanes from the input buffer using small X input buffer.

v4acc80	lmul4_maxdiff (v16int32 xbuff, int xstart, unsigned int xoffsets, int xstep, v16int32 ybuff, int ystart, v8int32 zbuff, int zstart, unsigned int zoffsets, int zstep)
	Multiply intrinsic function after computing the maximum difference between the selected lanes from the input buffer using small X input buffer.

v4acc80	lmul4_min (v32int32 xbuff, int xstart, unsigned int xoffsets, int xstep, int ystart, v8int32 zbuff, int zstart, unsigned int zoffsets, int zstep)
	Multiply intrinsic function after computing the minimum between the selected lanes from the input buffer .

v4acc80	lmul4_min (v16int32 xbuff, int xstart, unsigned int xoffsets, int xstep, int ystart, v8int32 zbuff, int zstart, unsigned int zoffsets, int zstep)
	Multiply intrinsic function after computing the minimum between the selected lanes from the input buffer using small X input buffer.

v4acc80	lmul4_min (v16int32 xbuff, int xstart, unsigned int xoffsets, int xstep, v16int32 ybuff, int ystart, v8int32 zbuff, int zstart, unsigned int zoffsets, int zstep)
	Multiply intrinsic function after computing the minimum between the selected lanes from the input buffer using small X input buffer.

v8acc80	lmul8_abs (v32int32 xbuff, int xstart, unsigned int xoffsets, v8int32 zbuff, int zstart, unsigned int zoffsets)
	Multiply intrinsic function after computing the absolute value in the selected lanes from the input buffer .

v8acc80	lmul8_abs (v16int32 xbuff, int xstart, unsigned int xoffsets, v8int32 zbuff, int zstart, unsigned int zoffsets)
	Multiply intrinsic function after computing the absolute value in the selected lanes from the input buffer using small X input buffer.

v8acc80	lmul8_max (v32int32 xbuff, int xstart, unsigned int xoffsets, int ystart, v8int32 zbuff, int zstart, unsigned int zoffsets)
	Multiply intrinsic function after computing the maximum between the selected lanes from the input buffer .

v8acc80	lmul8_max (v16int32 xbuff, int xstart, unsigned int xoffsets, int ystart, v8int32 zbuff, int zstart, unsigned int zoffsets)
	Multiply intrinsic function after computing the maximum between the selected lanes from the input buffer using small X input buffer.

v8acc80	lmul8_max (v16int32 xbuff, int xstart, unsigned int xoffsets, v16int32 ybuff, int ystart, v8int32 zbuff, int zstart, unsigned int zoffsets)
	Multiply intrinsic function after computing the maximum between the selected lanes from the input buffer using small X input buffer.

v8acc80	lmul8_maxdiff (v32int32 xbuff, int xstart, unsigned int xoffsets, int ystart, v8int32 zbuff, int zstart, unsigned int zoffsets)
	Multiply intrinsic function after computing the maximum difference between the selected lanes from the input buffer .

v8acc80	lmul8_maxdiff (v16int32 xbuff, int xstart, unsigned int xoffsets, int ystart, v8int32 zbuff, int zstart, unsigned int zoffsets)
	Multiply intrinsic function after computing the maximum difference between the selected lanes from the input buffer using small X input buffer.

v8acc80	lmul8_maxdiff (v16int32 xbuff, int xstart, unsigned int xoffsets, v16int32 ybuff, int ystart, v8int32 zbuff, int zstart, unsigned int zoffsets)
	Multiply intrinsic function after computing the maximum difference between the selected lanes from the input buffer using small X input buffer.

v8acc80	lmul8_min (v32int32 xbuff, int xstart, unsigned int xoffsets, int ystart, v8int32 zbuff, int zstart, unsigned int zoffsets)
	Multiply intrinsic function after computing the minimum between the selected lanes from the input buffer .

v8acc80	lmul8_min (v16int32 xbuff, int xstart, unsigned int xoffsets, int ystart, v8int32 zbuff, int zstart, unsigned int zoffsets)
	Multiply intrinsic function after computing the minimum between the selected lanes from the input buffer using small X input buffer.

v8acc80	lmul8_min (v16int32 xbuff, int xstart, unsigned int xoffsets, v16int32 ybuff, int ystart, v8int32 zbuff, int zstart, unsigned int zoffsets)
	Multiply intrinsic function after computing the minimum between the selected lanes from the input buffer using small X input buffer.

v4acc80	lnegmul4_abs (v32int32 xbuff, int xstart, unsigned int xoffsets, int xstep, v8int32 zbuff, int zstart, unsigned int zoffsets, int zstep)
	Multiply-negate intrinsic function after computing the absolute value in the selected lanes from the input buffer .

v4acc80	lnegmul4_abs (v16int32 xbuff, int xstart, unsigned int xoffsets, int xstep, v8int32 zbuff, int zstart, unsigned int zoffsets, int zstep)
	Multiply-negate intrinsic function after computing the absolute value in the selected lanes from the input buffer using small X input buffer.

v4acc80	lnegmul4_max (v32int32 xbuff, int xstart, unsigned int xoffsets, int xstep, int ystart, v8int32 zbuff, int zstart, unsigned int zoffsets, int zstep)
	Multiply-negate intrinsic function after computing the maximum between the selected lanes from the input buffer .

v4acc80	lnegmul4_max (v16int32 xbuff, int xstart, unsigned int xoffsets, int xstep, int ystart, v8int32 zbuff, int zstart, unsigned int zoffsets, int zstep)
	Multiply-negate intrinsic function after computing the maximum between the selected lanes from the input buffer using small X input buffer.

v4acc80	lnegmul4_max (v16int32 xbuff, int xstart, unsigned int xoffsets, int xstep, v16int32 ybuff, int ystart, v8int32 zbuff, int zstart, unsigned int zoffsets, int zstep)
	Multiply-negate intrinsic function after computing the maximum between the selected lanes from the input buffer using small X input buffer.

v4acc80	lnegmul4_maxdiff (v32int32 xbuff, int xstart, unsigned int xoffsets, int xstep, int ystart, v8int32 zbuff, int zstart, unsigned int zoffsets, int zstep)
	Multiply-negate intrinsic function after computing the maximum difference between the selected lanes from the input buffer .

v4acc80	lnegmul4_maxdiff (v16int32 xbuff, int xstart, unsigned int xoffsets, int xstep, int ystart, v8int32 zbuff, int zstart, unsigned int zoffsets, int zstep)
	Multiply-negate intrinsic function after computing the maximum difference between the selected lanes from the input buffer using small X input buffer.

v4acc80	lnegmul4_maxdiff (v16int32 xbuff, int xstart, unsigned int xoffsets, int xstep, v16int32 ybuff, int ystart, v8int32 zbuff, int zstart, unsigned int zoffsets, int zstep)
	Multiply-negate intrinsic function after computing the maximum difference between the selected lanes from the input buffer using small X input buffer.

v4acc80	lnegmul4_min (v32int32 xbuff, int xstart, unsigned int xoffsets, int xstep, int ystart, v8int32 zbuff, int zstart, unsigned int zoffsets, int zstep)
	Multiply-negate intrinsic function after computing the minimum between the selected lanes from the input buffer .

v4acc80	lnegmul4_min (v16int32 xbuff, int xstart, unsigned int xoffsets, int xstep, int ystart, v8int32 zbuff, int zstart, unsigned int zoffsets, int zstep)
	Multiply-negate intrinsic function after computing the minimum between the selected lanes from the input buffer using small X input buffer.

v4acc80	lnegmul4_min (v16int32 xbuff, int xstart, unsigned int xoffsets, int xstep, v16int32 ybuff, int ystart, v8int32 zbuff, int zstart, unsigned int zoffsets, int zstep)
	Multiply-negate intrinsic function after computing the minimum between the selected lanes from the input buffer using small X input buffer.

v8acc80	lnegmul8_abs (v32int32 xbuff, int xstart, unsigned int xoffsets, v8int32 zbuff, int zstart, unsigned int zoffsets)
	Multiply-negate intrinsic function after computing the absolute value in the selected lanes from the input buffer .

v8acc80	lnegmul8_abs (v16int32 xbuff, int xstart, unsigned int xoffsets, v8int32 zbuff, int zstart, unsigned int zoffsets)
	Multiply-negate intrinsic function after computing the absolute value in the selected lanes from the input buffer using small X input buffer.

v8acc80	lnegmul8_max (v32int32 xbuff, int xstart, unsigned int xoffsets, int ystart, v8int32 zbuff, int zstart, unsigned int zoffsets)
	Multiply-negate intrinsic function after computing the maximum between the selected lanes from the input buffer .

v8acc80	lnegmul8_max (v16int32 xbuff, int xstart, unsigned int xoffsets, int ystart, v8int32 zbuff, int zstart, unsigned int zoffsets)
	Multiply-negate intrinsic function after computing the maximum between the selected lanes from the input buffer using small X input buffer.

v8acc80	lnegmul8_max (v16int32 xbuff, int xstart, unsigned int xoffsets, v16int32 ybuff, int ystart, v8int32 zbuff, int zstart, unsigned int zoffsets)
	Multiply-negate intrinsic function after computing the maximum between the selected lanes from the input buffer using small X input buffer.

v8acc80	lnegmul8_maxdiff (v32int32 xbuff, int xstart, unsigned int xoffsets, int ystart, v8int32 zbuff, int zstart, unsigned int zoffsets)
	Multiply-negate intrinsic function after computing the maximum difference between the selected lanes from the input buffer .

v8acc80	lnegmul8_maxdiff (v16int32 xbuff, int xstart, unsigned int xoffsets, int ystart, v8int32 zbuff, int zstart, unsigned int zoffsets)
	Multiply-negate intrinsic function after computing the maximum difference between the selected lanes from the input buffer using small X input buffer.

v8acc80	lnegmul8_maxdiff (v16int32 xbuff, int xstart, unsigned int xoffsets, v16int32 ybuff, int ystart, v8int32 zbuff, int zstart, unsigned int zoffsets)
	Multiply-negate intrinsic function after computing the maximum difference between the selected lanes from the input buffer using small X input buffer.

v8acc80	lnegmul8_min (v32int32 xbuff, int xstart, unsigned int xoffsets, int ystart, v8int32 zbuff, int zstart, unsigned int zoffsets)
	Multiply-negate intrinsic function after computing the minimum between the selected lanes from the input buffer .

v8acc80	lnegmul8_min (v16int32 xbuff, int xstart, unsigned int xoffsets, int ystart, v8int32 zbuff, int zstart, unsigned int zoffsets)
	Multiply-negate intrinsic function after computing the minimum between the selected lanes from the input buffer using small X input buffer.

v8acc80	lnegmul8_min (v16int32 xbuff, int xstart, unsigned int xoffsets, v16int32 ybuff, int ystart, v8int32 zbuff, int zstart, unsigned int zoffsets)
	Multiply-negate intrinsic function after computing the minimum between the selected lanes from the input buffer using small X input buffer.

Function Documentation

v4acc80 lmac4_abs	(	v4acc80	acc,
		v32int32	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	xstep,
		v8int32	zbuff,
		int	zstart,
		unsigned int	zoffsets,
		int	zstep
	)

Multiply-accumulate intrinsic function after computing the absolute value in the selected lanes from the input buffer .

acc0 += z00*abs(x00) + z01*abs(x01)
acc1 += z10*abs(x10) + z11*abs(x11)
acc2 += z20*abs(x20) + z21*abs(x21)
acc3 += z30*abs(x30) + z31*abs(x31)

Parameters

Input/Output	Type	Comments
return	v4acc80	Returned accumulation vector (4 x int80 lanes)
acc	v4acc80	Incoming accumulation vector (4 x int80 lanes)
xbuff	v32int32	Input buffer of 32 elements of type int32
xstart	int	Starting position offset applied to all lanes of input from X buffer.
xoffsets	unsigned int	4b offset for each lane, applied to the x buffer. LSB apply to first lane
xstep	unsigned int	Step between each column for selection in the xbuffer.
zbuff	v8int32	Input buffer of 8 elements of type int32
zstart	int	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	unsigned int	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane
zstep	int	Step between each column for selection in the zbuffer.

Note

For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
Parameter 'zstart' must be a compile time constant.

v4acc80 lmac4_abs	(	v4acc80	acc,
		v16int32	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	xstep,
		v8int32	zbuff,
		int	zstart,
		unsigned int	zoffsets,
		int	zstep
	)

Multiply-accumulate intrinsic function after computing the absolute value in the selected lanes from the input buffer using small X input buffer.

acc0 += z00*abs(x00) + z01*abs(x01)
acc1 += z10*abs(x10) + z11*abs(x11)
acc2 += z20*abs(x20) + z21*abs(x21)
acc3 += z30*abs(x30) + z31*abs(x31)

Parameters

Input/Output	Type	Comments
return	v4acc80	Returned accumulation vector (4 x int80 lanes)
acc	v4acc80	Incoming accumulation vector (4 x int80 lanes)
xbuff	v16int32	Input buffer of 16 elements of type int32
xstart	int	Starting position offset applied to all lanes of input from X buffer.
xoffsets	unsigned int	4b offset for each lane, applied to the x buffer. LSB apply to first lane
xstep	unsigned int	Step between each column for selection in the xbuffer.
zbuff	v8int32	Input buffer of 8 elements of type int32
zstart	int	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	unsigned int	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane
zstep	int	Step between each column for selection in the zbuffer.

Note

For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
Parameter 'zstart' must be a compile time constant.

v4acc80 lmac4_max	(	v4acc80	acc,
		v32int32	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	xstep,
		int	ystart,
		v8int32	zbuff,
		int	zstart,
		unsigned int	zoffsets,
		int	zstep
	)

Multiply-accumulate intrinsic function after computing the maximum between the selected lanes from the input buffer .

acc0 += z00*(max(x00 , y00)) + z01*(max(x01 , y01))
acc1 += z10*(max(x10 , y10)) + z11*(max(x11 , y11))
acc2 += z20*(max(x20 , y20)) + z21*(max(x21 , y21))
acc3 += z30*(max(x30 , y30)) + z31*(max(x31 , y31))

Parameters

Input/Output	Type	Comments
return	v4acc80	Returned accumulation vector (4 x int80 lanes)
acc	v4acc80	Incoming accumulation vector (4 x int80 lanes)
xbuff	v32int32	Input buffer of 32 elements of type int32
xstart	int	Starting position offset applied to all lanes of input from X buffer.
xoffsets	unsigned int	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
xstep	unsigned int	Step between each column for selection in the x and y buffers. Ystep is symmetric to xstep (ystep advances by -xstep).
ystart	int	Starting position offset applied to all lanes for input from Y buffer.
zbuff	v8int32	Input buffer of 8 elements of type int32
zstart	int	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	unsigned int	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane
zstep	int	Step between each column for selection in the zbuffer.

Note

For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
Parameter 'zstart' must be a compile time constant.

v4acc80 lmac4_max	(	v4acc80	acc,
		v16int32	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	xstep,
		int	ystart,
		v8int32	zbuff,
		int	zstart,
		unsigned int	zoffsets,
		int	zstep
	)

Multiply-accumulate intrinsic function after computing the maximum between the selected lanes from the input buffer using small X input buffer.

acc0 += z00*(max(x00 , y00)) + z01*(max(x01 , y01))
acc1 += z10*(max(x10 , y10)) + z11*(max(x11 , y11))
acc2 += z20*(max(x20 , y20)) + z21*(max(x21 , y21))
acc3 += z30*(max(x30 , y30)) + z31*(max(x31 , y31))

Parameters

Input/Output	Type	Comments
return	v4acc80	Returned accumulation vector (4 x int80 lanes)
acc	v4acc80	Incoming accumulation vector (4 x int80 lanes)
xbuff	v16int32	Input buffer of 16 elements of type int32
xstart	int	Starting position offset applied to all lanes of input from X buffer.
xoffsets	unsigned int	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
xstep	unsigned int	Step between each column for selection in the x and y buffers. Ystep is symmetric to xstep (ystep advances by -xstep).
ystart	int	Starting position offset applied to all lanes for input from Y buffer.
zbuff	v8int32	Input buffer of 8 elements of type int32
zstart	int	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	unsigned int	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane
zstep	int	Step between each column for selection in the zbuffer.

Note

For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
Parameter 'zstart' must be a compile time constant.

v4acc80 lmac4_max	(	v4acc80	acc,
		v16int32	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	xstep,
		v16int32	ybuff,
		int	ystart,
		v8int32	zbuff,
		int	zstart,
		unsigned int	zoffsets,
		int	zstep
	)

Multiply-accumulate intrinsic function after computing the maximum between the selected lanes from the input buffer using small X input buffer.

acc0 += z00*(max(x00 , y00)) + z01*(max(x01 , y01))
acc1 += z10*(max(x10 , y10)) + z11*(max(x11 , y11))
acc2 += z20*(max(x20 , y20)) + z21*(max(x21 , y21))
acc3 += z30*(max(x30 , y30)) + z31*(max(x31 , y31))

Parameters

Input/Output	Type	Comments
return	v4acc80	Returned accumulation vector (4 x int80 lanes)
acc	v4acc80	Incoming accumulation vector (4 x int80 lanes)
xbuff	v16int32	Input buffer of 16 elements of type int32
xstart	int	Starting position offset applied to all lanes of input from X buffer.
xoffsets	unsigned int	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
xstep	unsigned int	Step between each column for selection in the x and y buffers. Ystep is symmetric to xstep (ystep advances by -xstep).
ybuff	v16int32	Right input buffer of 16 elements of type int32
ystart	int	Starting position offset applied to all lanes for input from Y buffer.
zbuff	v8int32	Input buffer of 8 elements of type int32
zstart	int	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	unsigned int	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane
zstep	int	Step between each column for selection in the zbuffer.

Note

For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
Parameter 'zstart' must be a compile time constant.

v4acc80 lmac4_maxdiff	(	v4acc80	acc,
		v32int32	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	xstep,
		int	ystart,
		v8int32	zbuff,
		int	zstart,
		unsigned int	zoffsets,
		int	zstep
	)

Multiply-accumulate intrinsic function after computing the maximum difference between the selected lanes from the input buffer .

acc0 += z00*((x00 - y00 > 0) ? (x00 - y00):0) + z01*((x01 - y01 > 0) ? (x01 - y01):0)
acc1 += z10*((x10 - y10 > 0) ? (x10 - y10):0) + z11*((x11 - y11 > 0) ? (x11 - y11):0)
acc2 += z20*((x20 - y20 > 0) ? (x20 - y20):0) + z21*((x21 - y21 > 0) ? (x21 - y21):0)
acc3 += z30*((x30 - y30 > 0) ? (x30 - y30):0) + z31*((x31 - y31 > 0) ? (x31 - y31):0)

Parameters

Input/Output	Type	Comments
return	v4acc80	Returned accumulation vector (4 x int80 lanes)
acc	v4acc80	Incoming accumulation vector (4 x int80 lanes)
xbuff	v32int32	Input buffer of 32 elements of type int32
xstart	int	Starting position offset applied to all lanes of input from X buffer.
xoffsets	unsigned int	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
xstep	unsigned int	Step between each column for selection in the x and y buffers. Ystep is symmetric to xstep (ystep advances by -xstep).
ystart	int	Starting position offset applied to all lanes for input from Y buffer.
zbuff	v8int32	Input buffer of 8 elements of type int32
zstart	int	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	unsigned int	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane
zstep	int	Step between each column for selection in the zbuffer.

Note

For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
Parameter 'zstart' must be a compile time constant.

v4acc80 lmac4_maxdiff	(	v4acc80	acc,
		v16int32	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	xstep,
		int	ystart,
		v8int32	zbuff,
		int	zstart,
		unsigned int	zoffsets,
		int	zstep
	)

Multiply-accumulate intrinsic function after computing the maximum difference between the selected lanes from the input buffer using small X input buffer.

acc0 += z00*((x00 - y00 > 0) ? (x00 - y00):0) + z01*((x01 - y01 > 0) ? (x01 - y01):0)
acc1 += z10*((x10 - y10 > 0) ? (x10 - y10):0) + z11*((x11 - y11 > 0) ? (x11 - y11):0)
acc2 += z20*((x20 - y20 > 0) ? (x20 - y20):0) + z21*((x21 - y21 > 0) ? (x21 - y21):0)
acc3 += z30*((x30 - y30 > 0) ? (x30 - y30):0) + z31*((x31 - y31 > 0) ? (x31 - y31):0)

Parameters

Input/Output	Type	Comments
return	v4acc80	Returned accumulation vector (4 x int80 lanes)
acc	v4acc80	Incoming accumulation vector (4 x int80 lanes)
xbuff	v16int32	Input buffer of 16 elements of type int32
xstart	int	Starting position offset applied to all lanes of input from X buffer.
xoffsets	unsigned int	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
xstep	unsigned int	Step between each column for selection in the x and y buffers. Ystep is symmetric to xstep (ystep advances by -xstep).
ystart	int	Starting position offset applied to all lanes for input from Y buffer.
zbuff	v8int32	Input buffer of 8 elements of type int32
zstart	int	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	unsigned int	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane
zstep	int	Step between each column for selection in the zbuffer.

Note

For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
Parameter 'zstart' must be a compile time constant.

v4acc80 lmac4_maxdiff	(	v4acc80	acc,
		v16int32	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	xstep,
		v16int32	ybuff,
		int	ystart,
		v8int32	zbuff,
		int	zstart,
		unsigned int	zoffsets,
		int	zstep
	)

Multiply-accumulate intrinsic function after computing the maximum difference between the selected lanes from the input buffer using small X input buffer.

acc0 += z00*((x00 - y00 > 0) ? (x00 - y00):0) + z01*((x01 - y01 > 0) ? (x01 - y01):0)
acc1 += z10*((x10 - y10 > 0) ? (x10 - y10):0) + z11*((x11 - y11 > 0) ? (x11 - y11):0)
acc2 += z20*((x20 - y20 > 0) ? (x20 - y20):0) + z21*((x21 - y21 > 0) ? (x21 - y21):0)
acc3 += z30*((x30 - y30 > 0) ? (x30 - y30):0) + z31*((x31 - y31 > 0) ? (x31 - y31):0)

Parameters

Input/Output	Type	Comments
return	v4acc80	Returned accumulation vector (4 x int80 lanes)
acc	v4acc80	Incoming accumulation vector (4 x int80 lanes)
xbuff	v16int32	Input buffer of 16 elements of type int32
xstart	int	Starting position offset applied to all lanes of input from X buffer.
xoffsets	unsigned int	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
xstep	unsigned int	Step between each column for selection in the x and y buffers. Ystep is symmetric to xstep (ystep advances by -xstep).
ybuff	v16int32	Right input buffer of 16 elements of type int32
ystart	int	Starting position offset applied to all lanes for input from Y buffer.
zbuff	v8int32	Input buffer of 8 elements of type int32
zstart	int	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	unsigned int	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane
zstep	int	Step between each column for selection in the zbuffer.

Note

For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
Parameter 'zstart' must be a compile time constant.

v4acc80 lmac4_min	(	v4acc80	acc,
		v32int32	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	xstep,
		int	ystart,
		v8int32	zbuff,
		int	zstart,
		unsigned int	zoffsets,
		int	zstep
	)

Multiply-accumulate intrinsic function after computing the minimum between the selected lanes from the input buffer .

acc0 += z00*(min(x00 , y00)) + z01*(min(x01 , y01))
acc1 += z10*(min(x10 , y10)) + z11*(min(x11 , y11))
acc2 += z20*(min(x20 , y20)) + z21*(min(x21 , y21))
acc3 += z30*(min(x30 , y30)) + z31*(min(x31 , y31))

Parameters

Input/Output	Type	Comments
return	v4acc80	Returned accumulation vector (4 x int80 lanes)
acc	v4acc80	Incoming accumulation vector (4 x int80 lanes)
xbuff	v32int32	Input buffer of 32 elements of type int32
xstart	int	Starting position offset applied to all lanes of input from X buffer.
xoffsets	unsigned int	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
xstep	unsigned int	Step between each column for selection in the x and y buffers. Ystep is symmetric to xstep (ystep advances by -xstep).
ystart	int	Starting position offset applied to all lanes for input from Y buffer.
zbuff	v8int32	Input buffer of 8 elements of type int32
zstart	int	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	unsigned int	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane
zstep	int	Step between each column for selection in the zbuffer.

Note

For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
Parameter 'zstart' must be a compile time constant.

v4acc80 lmac4_min	(	v4acc80	acc,
		v16int32	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	xstep,
		int	ystart,
		v8int32	zbuff,
		int	zstart,
		unsigned int	zoffsets,
		int	zstep
	)

Multiply-accumulate intrinsic function after computing the minimum between the selected lanes from the input buffer using small X input buffer.

acc0 += z00*(min(x00 , y00)) + z01*(min(x01 , y01))
acc1 += z10*(min(x10 , y10)) + z11*(min(x11 , y11))
acc2 += z20*(min(x20 , y20)) + z21*(min(x21 , y21))
acc3 += z30*(min(x30 , y30)) + z31*(min(x31 , y31))

Parameters

Input/Output	Type	Comments
return	v4acc80	Returned accumulation vector (4 x int80 lanes)
acc	v4acc80	Incoming accumulation vector (4 x int80 lanes)
xbuff	v16int32	Input buffer of 16 elements of type int32
xstart	int	Starting position offset applied to all lanes of input from X buffer.
xoffsets	unsigned int	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
xstep	unsigned int	Step between each column for selection in the x and y buffers. Ystep is symmetric to xstep (ystep advances by -xstep).
ystart	int	Starting position offset applied to all lanes for input from Y buffer.
zbuff	v8int32	Input buffer of 8 elements of type int32
zstart	int	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	unsigned int	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane
zstep	int	Step between each column for selection in the zbuffer.

Note

For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
Parameter 'zstart' must be a compile time constant.

v4acc80 lmac4_min	(	v4acc80	acc,
		v16int32	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	xstep,
		v16int32	ybuff,
		int	ystart,
		v8int32	zbuff,
		int	zstart,
		unsigned int	zoffsets,
		int	zstep
	)

Multiply-accumulate intrinsic function after computing the minimum between the selected lanes from the input buffer using small X input buffer.

acc0 += z00*(min(x00 , y00)) + z01*(min(x01 , y01))
acc1 += z10*(min(x10 , y10)) + z11*(min(x11 , y11))
acc2 += z20*(min(x20 , y20)) + z21*(min(x21 , y21))
acc3 += z30*(min(x30 , y30)) + z31*(min(x31 , y31))

Parameters

Input/Output	Type	Comments
return	v4acc80	Returned accumulation vector (4 x int80 lanes)
acc	v4acc80	Incoming accumulation vector (4 x int80 lanes)
xbuff	v16int32	Input buffer of 16 elements of type int32
xstart	int	Starting position offset applied to all lanes of input from X buffer.
xoffsets	unsigned int	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
xstep	unsigned int	Step between each column for selection in the x and y buffers. Ystep is symmetric to xstep (ystep advances by -xstep).
ybuff	v16int32	Right input buffer of 16 elements of type int32
ystart	int	Starting position offset applied to all lanes for input from Y buffer.
zbuff	v8int32	Input buffer of 8 elements of type int32
zstart	int	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	unsigned int	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane
zstep	int	Step between each column for selection in the zbuffer.

Note

For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
Parameter 'zstart' must be a compile time constant.

v8acc80 lmac8_abs	(	v8acc80	acc,
		v32int32	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		v8int32	zbuff,
		int	zstart,
		unsigned int	zoffsets
	)

Multiply-accumulate intrinsic function after computing the absolute value in the selected lanes from the input buffer .

acc0 += z00*abs(x00)
acc1 += z10*abs(x10)
acc2 += z20*abs(x20)
acc3 += z30*abs(x30)
acc4 += z40*abs(x40)
acc5 += z50*abs(x50)
acc6 += z60*abs(x60)
acc7 += z70*abs(x70)

Parameters

Input/Output	Type	Comments
return	v8acc80	Returned accumulation vector (8 x int80 lanes)
acc	v8acc80	Incoming accumulation vector (8 x int80 lanes)
xbuff	v32int32	Input buffer of 32 elements of type int32
xstart	int	Starting position offset applied to all lanes of input from X buffer.
xoffsets	unsigned int	4b offset for each lane, applied to the x buffer. LSB apply to first lane
zbuff	v8int32	Input buffer of 8 elements of type int32
zstart	int	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	unsigned int	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane

Note

For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
Parameter 'zstart' must be a compile time constant.

v8acc80 lmac8_abs	(	v8acc80	acc,
		v16int32	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		v8int32	zbuff,
		int	zstart,
		unsigned int	zoffsets
	)

Multiply-accumulate intrinsic function after computing the absolute value in the selected lanes from the input buffer using small X input buffer.

acc0 += z00*abs(x00)
acc1 += z10*abs(x10)
acc2 += z20*abs(x20)
acc3 += z30*abs(x30)
acc4 += z40*abs(x40)
acc5 += z50*abs(x50)
acc6 += z60*abs(x60)
acc7 += z70*abs(x70)

Parameters

Input/Output	Type	Comments
return	v8acc80	Returned accumulation vector (8 x int80 lanes)
acc	v8acc80	Incoming accumulation vector (8 x int80 lanes)
xbuff	v16int32	Input buffer of 16 elements of type int32
xstart	int	Starting position offset applied to all lanes of input from X buffer.
xoffsets	unsigned int	4b offset for each lane, applied to the x buffer. LSB apply to first lane
zbuff	v8int32	Input buffer of 8 elements of type int32
zstart	int	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	unsigned int	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane

Note

For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
Parameter 'zstart' must be a compile time constant.

v8acc80 lmac8_max	(	v8acc80	acc,
		v32int32	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	ystart,
		v8int32	zbuff,
		int	zstart,
		unsigned int	zoffsets
	)

Multiply-accumulate intrinsic function after computing the maximum between the selected lanes from the input buffer .

acc0 += z00*(max(x00 , y00))
acc1 += z10*(max(x10 , y10))
acc2 += z20*(max(x20 , y20))
acc3 += z30*(max(x30 , y30))
acc4 += z40*(max(x40 , y40))
acc5 += z50*(max(x50 , y50))
acc6 += z60*(max(x60 , y60))
acc7 += z70*(max(x70 , y70))

Parameters

Input/Output	Type	Comments
return	v8acc80	Returned accumulation vector (8 x int80 lanes)
acc	v8acc80	Incoming accumulation vector (8 x int80 lanes)
xbuff	v32int32	Input buffer of 32 elements of type int32
xstart	int	Starting position offset applied to all lanes of input from X buffer.
xoffsets	unsigned int	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
ystart	int	Starting position offset applied to all lanes for input from Y buffer.
zbuff	v8int32	Input buffer of 8 elements of type int32
zstart	int	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	unsigned int	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane

Note

For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
Parameter 'zstart' must be a compile time constant.

v8acc80 lmac8_max	(	v8acc80	acc,
		v16int32	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	ystart,
		v8int32	zbuff,
		int	zstart,
		unsigned int	zoffsets
	)

Multiply-accumulate intrinsic function after computing the maximum between the selected lanes from the input buffer using small X input buffer.

acc0 += z00*(max(x00 , y00))
acc1 += z10*(max(x10 , y10))
acc2 += z20*(max(x20 , y20))
acc3 += z30*(max(x30 , y30))
acc4 += z40*(max(x40 , y40))
acc5 += z50*(max(x50 , y50))
acc6 += z60*(max(x60 , y60))
acc7 += z70*(max(x70 , y70))

Parameters

Input/Output	Type	Comments
return	v8acc80	Returned accumulation vector (8 x int80 lanes)
acc	v8acc80	Incoming accumulation vector (8 x int80 lanes)
xbuff	v16int32	Input buffer of 16 elements of type int32
xstart	int	Starting position offset applied to all lanes of input from X buffer.
xoffsets	unsigned int	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
ystart	int	Starting position offset applied to all lanes for input from Y buffer.
zbuff	v8int32	Input buffer of 8 elements of type int32
zstart	int	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	unsigned int	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane

Note

For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
Parameter 'zstart' must be a compile time constant.

v8acc80 lmac8_max	(	v8acc80	acc,
		v16int32	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		v16int32	ybuff,
		int	ystart,
		v8int32	zbuff,
		int	zstart,
		unsigned int	zoffsets
	)

Multiply-accumulate intrinsic function after computing the maximum between the selected lanes from the input buffer using small X input buffer.

acc0 += z00*(max(x00 , y00))
acc1 += z10*(max(x10 , y10))
acc2 += z20*(max(x20 , y20))
acc3 += z30*(max(x30 , y30))
acc4 += z40*(max(x40 , y40))
acc5 += z50*(max(x50 , y50))
acc6 += z60*(max(x60 , y60))
acc7 += z70*(max(x70 , y70))

Parameters

Input/Output	Type	Comments
return	v8acc80	Returned accumulation vector (8 x int80 lanes)
acc	v8acc80	Incoming accumulation vector (8 x int80 lanes)
xbuff	v16int32	Input buffer of 16 elements of type int32
xstart	int	Starting position offset applied to all lanes of input from X buffer.
xoffsets	unsigned int	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
ybuff	v16int32	Right input buffer of 16 elements of type int32
ystart	int	Starting position offset applied to all lanes for input from Y buffer.
zbuff	v8int32	Input buffer of 8 elements of type int32
zstart	int	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	unsigned int	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane

Note

For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
Parameter 'zstart' must be a compile time constant.

v8acc80 lmac8_maxdiff	(	v8acc80	acc,
		v32int32	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	ystart,
		v8int32	zbuff,
		int	zstart,
		unsigned int	zoffsets
	)

Multiply-accumulate intrinsic function after computing the maximum difference between the selected lanes from the input buffer .

acc0 += z00*((x00 - y00 > 0) ? (x00 - y00):0)
acc1 += z10*((x10 - y10 > 0) ? (x10 - y10):0)
acc2 += z20*((x20 - y20 > 0) ? (x20 - y20):0)
acc3 += z30*((x30 - y30 > 0) ? (x30 - y30):0)
acc4 += z40*((x40 - y40 > 0) ? (x40 - y40):0)
acc5 += z50*((x50 - y50 > 0) ? (x50 - y50):0)
acc6 += z60*((x60 - y60 > 0) ? (x60 - y60):0)
acc7 += z70*((x70 - y70 > 0) ? (x70 - y70):0)

Parameters

Input/Output	Type	Comments
return	v8acc80	Returned accumulation vector (8 x int80 lanes)
acc	v8acc80	Incoming accumulation vector (8 x int80 lanes)
xbuff	v32int32	Input buffer of 32 elements of type int32
xstart	int	Starting position offset applied to all lanes of input from X buffer.
xoffsets	unsigned int	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
ystart	int	Starting position offset applied to all lanes for input from Y buffer.
zbuff	v8int32	Input buffer of 8 elements of type int32
zstart	int	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	unsigned int	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane

Note

For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
Parameter 'zstart' must be a compile time constant.

v8acc80 lmac8_maxdiff	(	v8acc80	acc,
		v16int32	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	ystart,
		v8int32	zbuff,
		int	zstart,
		unsigned int	zoffsets
	)

Multiply-accumulate intrinsic function after computing the maximum difference between the selected lanes from the input buffer using small X input buffer.

acc0 += z00*((x00 - y00 > 0) ? (x00 - y00):0)
acc1 += z10*((x10 - y10 > 0) ? (x10 - y10):0)
acc2 += z20*((x20 - y20 > 0) ? (x20 - y20):0)
acc3 += z30*((x30 - y30 > 0) ? (x30 - y30):0)
acc4 += z40*((x40 - y40 > 0) ? (x40 - y40):0)
acc5 += z50*((x50 - y50 > 0) ? (x50 - y50):0)
acc6 += z60*((x60 - y60 > 0) ? (x60 - y60):0)
acc7 += z70*((x70 - y70 > 0) ? (x70 - y70):0)

Parameters

Input/Output	Type	Comments
return	v8acc80	Returned accumulation vector (8 x int80 lanes)
acc	v8acc80	Incoming accumulation vector (8 x int80 lanes)
xbuff	v16int32	Input buffer of 16 elements of type int32
xstart	int	Starting position offset applied to all lanes of input from X buffer.
xoffsets	unsigned int	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
ystart	int	Starting position offset applied to all lanes for input from Y buffer.
zbuff	v8int32	Input buffer of 8 elements of type int32
zstart	int	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	unsigned int	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane

Note

For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
Parameter 'zstart' must be a compile time constant.

v8acc80 lmac8_maxdiff	(	v8acc80	acc,
		v16int32	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		v16int32	ybuff,
		int	ystart,
		v8int32	zbuff,
		int	zstart,
		unsigned int	zoffsets
	)

Multiply-accumulate intrinsic function after computing the maximum difference between the selected lanes from the input buffer using small X input buffer.

acc0 += z00*((x00 - y00 > 0) ? (x00 - y00):0)
acc1 += z10*((x10 - y10 > 0) ? (x10 - y10):0)
acc2 += z20*((x20 - y20 > 0) ? (x20 - y20):0)
acc3 += z30*((x30 - y30 > 0) ? (x30 - y30):0)
acc4 += z40*((x40 - y40 > 0) ? (x40 - y40):0)
acc5 += z50*((x50 - y50 > 0) ? (x50 - y50):0)
acc6 += z60*((x60 - y60 > 0) ? (x60 - y60):0)
acc7 += z70*((x70 - y70 > 0) ? (x70 - y70):0)

Parameters

Input/Output	Type	Comments
return	v8acc80	Returned accumulation vector (8 x int80 lanes)
acc	v8acc80	Incoming accumulation vector (8 x int80 lanes)
xbuff	v16int32	Input buffer of 16 elements of type int32
xstart	int	Starting position offset applied to all lanes of input from X buffer.
xoffsets	unsigned int	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
ybuff	v16int32	Right input buffer of 16 elements of type int32
ystart	int	Starting position offset applied to all lanes for input from Y buffer.
zbuff	v8int32	Input buffer of 8 elements of type int32
zstart	int	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	unsigned int	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane

Note

For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
Parameter 'zstart' must be a compile time constant.

v8acc80 lmac8_min	(	v8acc80	acc,
		v32int32	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	ystart,
		v8int32	zbuff,
		int	zstart,
		unsigned int	zoffsets
	)

Multiply-accumulate intrinsic function after computing the minimum between the selected lanes from the input buffer .

acc0 += z00*(min(x00 , y00))
acc1 += z10*(min(x10 , y10))
acc2 += z20*(min(x20 , y20))
acc3 += z30*(min(x30 , y30))
acc4 += z40*(min(x40 , y40))
acc5 += z50*(min(x50 , y50))
acc6 += z60*(min(x60 , y60))
acc7 += z70*(min(x70 , y70))

Parameters

Input/Output	Type	Comments
return	v8acc80	Returned accumulation vector (8 x int80 lanes)
acc	v8acc80	Incoming accumulation vector (8 x int80 lanes)
xbuff	v32int32	Input buffer of 32 elements of type int32
xstart	int	Starting position offset applied to all lanes of input from X buffer.
xoffsets	unsigned int	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
ystart	int	Starting position offset applied to all lanes for input from Y buffer.
zbuff	v8int32	Input buffer of 8 elements of type int32
zstart	int	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	unsigned int	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane

Note

For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
Parameter 'zstart' must be a compile time constant.

v8acc80 lmac8_min	(	v8acc80	acc,
		v16int32	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	ystart,
		v8int32	zbuff,
		int	zstart,
		unsigned int	zoffsets
	)

Multiply-accumulate intrinsic function after computing the minimum between the selected lanes from the input buffer using small X input buffer.

acc0 += z00*(min(x00 , y00))
acc1 += z10*(min(x10 , y10))
acc2 += z20*(min(x20 , y20))
acc3 += z30*(min(x30 , y30))
acc4 += z40*(min(x40 , y40))
acc5 += z50*(min(x50 , y50))
acc6 += z60*(min(x60 , y60))
acc7 += z70*(min(x70 , y70))

Parameters

Input/Output	Type	Comments
return	v8acc80	Returned accumulation vector (8 x int80 lanes)
acc	v8acc80	Incoming accumulation vector (8 x int80 lanes)
xbuff	v16int32	Input buffer of 16 elements of type int32
xstart	int	Starting position offset applied to all lanes of input from X buffer.
xoffsets	unsigned int	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
ystart	int	Starting position offset applied to all lanes for input from Y buffer.
zbuff	v8int32	Input buffer of 8 elements of type int32
zstart	int	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	unsigned int	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane

Note

For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
Parameter 'zstart' must be a compile time constant.

v8acc80 lmac8_min	(	v8acc80	acc,
		v16int32	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		v16int32	ybuff,
		int	ystart,
		v8int32	zbuff,
		int	zstart,
		unsigned int	zoffsets
	)

Multiply-accumulate intrinsic function after computing the minimum between the selected lanes from the input buffer using small X input buffer.

acc0 += z00*(min(x00 , y00))
acc1 += z10*(min(x10 , y10))
acc2 += z20*(min(x20 , y20))
acc3 += z30*(min(x30 , y30))
acc4 += z40*(min(x40 , y40))
acc5 += z50*(min(x50 , y50))
acc6 += z60*(min(x60 , y60))
acc7 += z70*(min(x70 , y70))

Parameters

Input/Output	Type	Comments
return	v8acc80	Returned accumulation vector (8 x int80 lanes)
acc	v8acc80	Incoming accumulation vector (8 x int80 lanes)
xbuff	v16int32	Input buffer of 16 elements of type int32
xstart	int	Starting position offset applied to all lanes of input from X buffer.
xoffsets	unsigned int	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
ybuff	v16int32	Right input buffer of 16 elements of type int32
ystart	int	Starting position offset applied to all lanes for input from Y buffer.
zbuff	v8int32	Input buffer of 8 elements of type int32
zstart	int	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	unsigned int	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane

Note

For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
Parameter 'zstart' must be a compile time constant.

v4acc80 lmsc4_abs	(	v4acc80	acc,
		v32int32	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	xstep,
		v8int32	zbuff,
		int	zstart,
		unsigned int	zoffsets,
		int	zstep
	)

Multiply-subtract intrinsic function after computing the absolute value in the selected lanes from the input buffer .

acc0 -= z00*abs(x00) + z01*abs(x01)
acc1 -= z10*abs(x10) + z11*abs(x11)
acc2 -= z20*abs(x20) + z21*abs(x21)
acc3 -= z30*abs(x30) + z31*abs(x31)

Parameters

Input/Output	Type	Comments
return	v4acc80	Returned accumulation vector (4 x int80 lanes)
acc	v4acc80	Incoming accumulation vector (4 x int80 lanes)
xbuff	v32int32	Input buffer of 32 elements of type int32
xstart	int	Starting position offset applied to all lanes of input from X buffer.
xoffsets	unsigned int	4b offset for each lane, applied to the x buffer. LSB apply to first lane
xstep	unsigned int	Step between each column for selection in the xbuffer.
zbuff	v8int32	Input buffer of 8 elements of type int32
zstart	int	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	unsigned int	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane
zstep	int	Step between each column for selection in the zbuffer.

Note

For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
Parameter 'zstart' must be a compile time constant.

v4acc80 lmsc4_abs	(	v4acc80	acc,
		v16int32	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	xstep,
		v8int32	zbuff,
		int	zstart,
		unsigned int	zoffsets,
		int	zstep
	)

Multiply-subtract intrinsic function after computing the absolute value in the selected lanes from the input buffer using small X input buffer.

acc0 -= z00*abs(x00) + z01*abs(x01)
acc1 -= z10*abs(x10) + z11*abs(x11)
acc2 -= z20*abs(x20) + z21*abs(x21)
acc3 -= z30*abs(x30) + z31*abs(x31)

Parameters

Input/Output	Type	Comments
return	v4acc80	Returned accumulation vector (4 x int80 lanes)
acc	v4acc80	Incoming accumulation vector (4 x int80 lanes)
xbuff	v16int32	Input buffer of 16 elements of type int32
xstart	int	Starting position offset applied to all lanes of input from X buffer.
xoffsets	unsigned int	4b offset for each lane, applied to the x buffer. LSB apply to first lane
xstep	unsigned int	Step between each column for selection in the xbuffer.
zbuff	v8int32	Input buffer of 8 elements of type int32
zstart	int	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	unsigned int	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane
zstep	int	Step between each column for selection in the zbuffer.

Note

For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
Parameter 'zstart' must be a compile time constant.

v4acc80 lmsc4_max	(	v4acc80	acc,
		v32int32	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	xstep,
		int	ystart,
		v8int32	zbuff,
		int	zstart,
		unsigned int	zoffsets,
		int	zstep
	)

Multiply-subtract intrinsic function after computing the maximum between the selected lanes from the input buffer .

acc0 -= z00*(max(x00 , y00)) + z01*(max(x01 , y01))
acc1 -= z10*(max(x10 , y10)) + z11*(max(x11 , y11))
acc2 -= z20*(max(x20 , y20)) + z21*(max(x21 , y21))
acc3 -= z30*(max(x30 , y30)) + z31*(max(x31 , y31))

Parameters

Input/Output	Type	Comments
return	v4acc80	Returned accumulation vector (4 x int80 lanes)
acc	v4acc80	Incoming accumulation vector (4 x int80 lanes)
xbuff	v32int32	Input buffer of 32 elements of type int32
xstart	int	Starting position offset applied to all lanes of input from X buffer.
xoffsets	unsigned int	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
xstep	unsigned int	Step between each column for selection in the x and y buffers. Ystep is symmetric to xstep (ystep advances by -xstep).
ystart	int	Starting position offset applied to all lanes for input from Y buffer.
zbuff	v8int32	Input buffer of 8 elements of type int32
zstart	int	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	unsigned int	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane
zstep	int	Step between each column for selection in the zbuffer.

Note

For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
Parameter 'zstart' must be a compile time constant.

v4acc80 lmsc4_max	(	v4acc80	acc,
		v16int32	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	xstep,
		int	ystart,
		v8int32	zbuff,
		int	zstart,
		unsigned int	zoffsets,
		int	zstep
	)

Multiply-subtract intrinsic function after computing the maximum between the selected lanes from the input buffer using small X input buffer.

acc0 -= z00*(max(x00 , y00)) + z01*(max(x01 , y01))
acc1 -= z10*(max(x10 , y10)) + z11*(max(x11 , y11))
acc2 -= z20*(max(x20 , y20)) + z21*(max(x21 , y21))
acc3 -= z30*(max(x30 , y30)) + z31*(max(x31 , y31))

Parameters

Input/Output	Type	Comments
return	v4acc80	Returned accumulation vector (4 x int80 lanes)
acc	v4acc80	Incoming accumulation vector (4 x int80 lanes)
xbuff	v16int32	Input buffer of 16 elements of type int32
xstart	int	Starting position offset applied to all lanes of input from X buffer.
xoffsets	unsigned int	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
xstep	unsigned int	Step between each column for selection in the x and y buffers. Ystep is symmetric to xstep (ystep advances by -xstep).
ystart	int	Starting position offset applied to all lanes for input from Y buffer.
zbuff	v8int32	Input buffer of 8 elements of type int32
zstart	int	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	unsigned int	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane
zstep	int	Step between each column for selection in the zbuffer.

Note

For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
Parameter 'zstart' must be a compile time constant.

v4acc80 lmsc4_max	(	v4acc80	acc,
		v16int32	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	xstep,
		v16int32	ybuff,
		int	ystart,
		v8int32	zbuff,
		int	zstart,
		unsigned int	zoffsets,
		int	zstep
	)

Multiply-subtract intrinsic function after computing the maximum between the selected lanes from the input buffer using small X input buffer.

acc0 -= z00*(max(x00 , y00)) + z01*(max(x01 , y01))
acc1 -= z10*(max(x10 , y10)) + z11*(max(x11 , y11))
acc2 -= z20*(max(x20 , y20)) + z21*(max(x21 , y21))
acc3 -= z30*(max(x30 , y30)) + z31*(max(x31 , y31))

Parameters

Input/Output	Type	Comments
return	v4acc80	Returned accumulation vector (4 x int80 lanes)
acc	v4acc80	Incoming accumulation vector (4 x int80 lanes)
xbuff	v16int32	Input buffer of 16 elements of type int32
xstart	int	Starting position offset applied to all lanes of input from X buffer.
xoffsets	unsigned int	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
xstep	unsigned int	Step between each column for selection in the x and y buffers. Ystep is symmetric to xstep (ystep advances by -xstep).
ybuff	v16int32	Right input buffer of 16 elements of type int32
ystart	int	Starting position offset applied to all lanes for input from Y buffer.
zbuff	v8int32	Input buffer of 8 elements of type int32
zstart	int	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	unsigned int	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane
zstep	int	Step between each column for selection in the zbuffer.

Note

For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
Parameter 'zstart' must be a compile time constant.

v4acc80 lmsc4_maxdiff	(	v4acc80	acc,
		v32int32	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	xstep,
		int	ystart,
		v8int32	zbuff,
		int	zstart,
		unsigned int	zoffsets,
		int	zstep
	)

Multiply-subtract intrinsic function after computing the maximum difference between the selected lanes from the input buffer .

acc0 -= z00*((x00 - y00 > 0) ? (x00 - y00):0) + z01*((x01 - y01 > 0) ? (x01 - y01):0)
acc1 -= z10*((x10 - y10 > 0) ? (x10 - y10):0) + z11*((x11 - y11 > 0) ? (x11 - y11):0)
acc2 -= z20*((x20 - y20 > 0) ? (x20 - y20):0) + z21*((x21 - y21 > 0) ? (x21 - y21):0)
acc3 -= z30*((x30 - y30 > 0) ? (x30 - y30):0) + z31*((x31 - y31 > 0) ? (x31 - y31):0)

Parameters

Input/Output	Type	Comments
return	v4acc80	Returned accumulation vector (4 x int80 lanes)
acc	v4acc80	Incoming accumulation vector (4 x int80 lanes)
xbuff	v32int32	Input buffer of 32 elements of type int32
xstart	int	Starting position offset applied to all lanes of input from X buffer.
xoffsets	unsigned int	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
xstep	unsigned int	Step between each column for selection in the x and y buffers. Ystep is symmetric to xstep (ystep advances by -xstep).
ystart	int	Starting position offset applied to all lanes for input from Y buffer.
zbuff	v8int32	Input buffer of 8 elements of type int32
zstart	int	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	unsigned int	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane
zstep	int	Step between each column for selection in the zbuffer.

Note

For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
Parameter 'zstart' must be a compile time constant.

v4acc80 lmsc4_maxdiff	(	v4acc80	acc,
		v16int32	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	xstep,
		int	ystart,
		v8int32	zbuff,
		int	zstart,
		unsigned int	zoffsets,
		int	zstep
	)

Multiply-subtract intrinsic function after computing the maximum difference between the selected lanes from the input buffer using small X input buffer.

acc0 -= z00*((x00 - y00 > 0) ? (x00 - y00):0) + z01*((x01 - y01 > 0) ? (x01 - y01):0)
acc1 -= z10*((x10 - y10 > 0) ? (x10 - y10):0) + z11*((x11 - y11 > 0) ? (x11 - y11):0)
acc2 -= z20*((x20 - y20 > 0) ? (x20 - y20):0) + z21*((x21 - y21 > 0) ? (x21 - y21):0)
acc3 -= z30*((x30 - y30 > 0) ? (x30 - y30):0) + z31*((x31 - y31 > 0) ? (x31 - y31):0)

Parameters

Input/Output	Type	Comments
return	v4acc80	Returned accumulation vector (4 x int80 lanes)
acc	v4acc80	Incoming accumulation vector (4 x int80 lanes)
xbuff	v16int32	Input buffer of 16 elements of type int32
xstart	int	Starting position offset applied to all lanes of input from X buffer.
xoffsets	unsigned int	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
xstep	unsigned int	Step between each column for selection in the x and y buffers. Ystep is symmetric to xstep (ystep advances by -xstep).
ystart	int	Starting position offset applied to all lanes for input from Y buffer.
zbuff	v8int32	Input buffer of 8 elements of type int32
zstart	int	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	unsigned int	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane
zstep	int	Step between each column for selection in the zbuffer.

Note

For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
Parameter 'zstart' must be a compile time constant.

v4acc80 lmsc4_maxdiff	(	v4acc80	acc,
		v16int32	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	xstep,
		v16int32	ybuff,
		int	ystart,
		v8int32	zbuff,
		int	zstart,
		unsigned int	zoffsets,
		int	zstep
	)

Multiply-subtract intrinsic function after computing the maximum difference between the selected lanes from the input buffer using small X input buffer.

acc0 -= z00*((x00 - y00 > 0) ? (x00 - y00):0) + z01*((x01 - y01 > 0) ? (x01 - y01):0)
acc1 -= z10*((x10 - y10 > 0) ? (x10 - y10):0) + z11*((x11 - y11 > 0) ? (x11 - y11):0)
acc2 -= z20*((x20 - y20 > 0) ? (x20 - y20):0) + z21*((x21 - y21 > 0) ? (x21 - y21):0)
acc3 -= z30*((x30 - y30 > 0) ? (x30 - y30):0) + z31*((x31 - y31 > 0) ? (x31 - y31):0)

Parameters

Input/Output	Type	Comments
return	v4acc80	Returned accumulation vector (4 x int80 lanes)
acc	v4acc80	Incoming accumulation vector (4 x int80 lanes)
xbuff	v16int32	Input buffer of 16 elements of type int32
xstart	int	Starting position offset applied to all lanes of input from X buffer.
xoffsets	unsigned int	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
xstep	unsigned int	Step between each column for selection in the x and y buffers. Ystep is symmetric to xstep (ystep advances by -xstep).
ybuff	v16int32	Right input buffer of 16 elements of type int32
ystart	int	Starting position offset applied to all lanes for input from Y buffer.
zbuff	v8int32	Input buffer of 8 elements of type int32
zstart	int	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	unsigned int	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane
zstep	int	Step between each column for selection in the zbuffer.

Note

For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
Parameter 'zstart' must be a compile time constant.

v4acc80 lmsc4_min	(	v4acc80	acc,
		v32int32	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	xstep,
		int	ystart,
		v8int32	zbuff,
		int	zstart,
		unsigned int	zoffsets,
		int	zstep
	)

Multiply-subtract intrinsic function after computing the minimum between the selected lanes from the input buffer .

acc0 -= z00*(min(x00 , y00)) + z01*(min(x01 , y01))
acc1 -= z10*(min(x10 , y10)) + z11*(min(x11 , y11))
acc2 -= z20*(min(x20 , y20)) + z21*(min(x21 , y21))
acc3 -= z30*(min(x30 , y30)) + z31*(min(x31 , y31))

Parameters

Input/Output	Type	Comments
return	v4acc80	Returned accumulation vector (4 x int80 lanes)
acc	v4acc80	Incoming accumulation vector (4 x int80 lanes)
xbuff	v32int32	Input buffer of 32 elements of type int32
xstart	int	Starting position offset applied to all lanes of input from X buffer.
xoffsets	unsigned int	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
xstep	unsigned int	Step between each column for selection in the x and y buffers. Ystep is symmetric to xstep (ystep advances by -xstep).
ystart	int	Starting position offset applied to all lanes for input from Y buffer.
zbuff	v8int32	Input buffer of 8 elements of type int32
zstart	int	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	unsigned int	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane
zstep	int	Step between each column for selection in the zbuffer.

Note

For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
Parameter 'zstart' must be a compile time constant.

v4acc80 lmsc4_min	(	v4acc80	acc,
		v16int32	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	xstep,
		int	ystart,
		v8int32	zbuff,
		int	zstart,
		unsigned int	zoffsets,
		int	zstep
	)

Multiply-subtract intrinsic function after computing the minimum between the selected lanes from the input buffer using small X input buffer.

acc0 -= z00*(min(x00 , y00)) + z01*(min(x01 , y01))
acc1 -= z10*(min(x10 , y10)) + z11*(min(x11 , y11))
acc2 -= z20*(min(x20 , y20)) + z21*(min(x21 , y21))
acc3 -= z30*(min(x30 , y30)) + z31*(min(x31 , y31))

Parameters

Input/Output	Type	Comments
return	v4acc80	Returned accumulation vector (4 x int80 lanes)
acc	v4acc80	Incoming accumulation vector (4 x int80 lanes)
xbuff	v16int32	Input buffer of 16 elements of type int32
xstart	int	Starting position offset applied to all lanes of input from X buffer.
xoffsets	unsigned int	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
xstep	unsigned int	Step between each column for selection in the x and y buffers. Ystep is symmetric to xstep (ystep advances by -xstep).
ystart	int	Starting position offset applied to all lanes for input from Y buffer.
zbuff	v8int32	Input buffer of 8 elements of type int32
zstart	int	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	unsigned int	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane
zstep	int	Step between each column for selection in the zbuffer.

Note

For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
Parameter 'zstart' must be a compile time constant.

v4acc80 lmsc4_min	(	v4acc80	acc,
		v16int32	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	xstep,
		v16int32	ybuff,
		int	ystart,
		v8int32	zbuff,
		int	zstart,
		unsigned int	zoffsets,
		int	zstep
	)

Multiply-subtract intrinsic function after computing the minimum between the selected lanes from the input buffer using small X input buffer.

acc0 -= z00*(min(x00 , y00)) + z01*(min(x01 , y01))
acc1 -= z10*(min(x10 , y10)) + z11*(min(x11 , y11))
acc2 -= z20*(min(x20 , y20)) + z21*(min(x21 , y21))
acc3 -= z30*(min(x30 , y30)) + z31*(min(x31 , y31))

Parameters

Input/Output	Type	Comments
return	v4acc80	Returned accumulation vector (4 x int80 lanes)
acc	v4acc80	Incoming accumulation vector (4 x int80 lanes)
xbuff	v16int32	Input buffer of 16 elements of type int32
xstart	int	Starting position offset applied to all lanes of input from X buffer.
xoffsets	unsigned int	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
xstep	unsigned int	Step between each column for selection in the x and y buffers. Ystep is symmetric to xstep (ystep advances by -xstep).
ybuff	v16int32	Right input buffer of 16 elements of type int32
ystart	int	Starting position offset applied to all lanes for input from Y buffer.
zbuff	v8int32	Input buffer of 8 elements of type int32
zstart	int	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	unsigned int	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane
zstep	int	Step between each column for selection in the zbuffer.

Note

For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
Parameter 'zstart' must be a compile time constant.

v8acc80 lmsc8_abs	(	v8acc80	acc,
		v32int32	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		v8int32	zbuff,
		int	zstart,
		unsigned int	zoffsets
	)

Multiply-subtract intrinsic function after computing the absolute value in the selected lanes from the input buffer .

acc0 -= z00*abs(x00)
acc1 -= z10*abs(x10)
acc2 -= z20*abs(x20)
acc3 -= z30*abs(x30)
acc4 -= z40*abs(x40)
acc5 -= z50*abs(x50)
acc6 -= z60*abs(x60)
acc7 -= z70*abs(x70)

Parameters

Input/Output	Type	Comments
return	v8acc80	Returned accumulation vector (8 x int80 lanes)
acc	v8acc80	Incoming accumulation vector (8 x int80 lanes)
xbuff	v32int32	Input buffer of 32 elements of type int32
xstart	int	Starting position offset applied to all lanes of input from X buffer.
xoffsets	unsigned int	4b offset for each lane, applied to the x buffer. LSB apply to first lane
zbuff	v8int32	Input buffer of 8 elements of type int32
zstart	int	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	unsigned int	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane

Note

For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
Parameter 'zstart' must be a compile time constant.

v8acc80 lmsc8_abs	(	v8acc80	acc,
		v16int32	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		v8int32	zbuff,
		int	zstart,
		unsigned int	zoffsets
	)

Multiply-subtract intrinsic function after computing the absolute value in the selected lanes from the input buffer using small X input buffer.

acc0 -= z00*abs(x00)
acc1 -= z10*abs(x10)
acc2 -= z20*abs(x20)
acc3 -= z30*abs(x30)
acc4 -= z40*abs(x40)
acc5 -= z50*abs(x50)
acc6 -= z60*abs(x60)
acc7 -= z70*abs(x70)

Parameters

Input/Output	Type	Comments
return	v8acc80	Returned accumulation vector (8 x int80 lanes)
acc	v8acc80	Incoming accumulation vector (8 x int80 lanes)
xbuff	v16int32	Input buffer of 16 elements of type int32
xstart	int	Starting position offset applied to all lanes of input from X buffer.
xoffsets	unsigned int	4b offset for each lane, applied to the x buffer. LSB apply to first lane
zbuff	v8int32	Input buffer of 8 elements of type int32
zstart	int	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	unsigned int	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane

Note

For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
Parameter 'zstart' must be a compile time constant.

v8acc80 lmsc8_max	(	v8acc80	acc,
		v32int32	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	ystart,
		v8int32	zbuff,
		int	zstart,
		unsigned int	zoffsets
	)

Multiply-subtract intrinsic function after computing the maximum between the selected lanes from the input buffer .

acc0 -= z00*(max(x00 , y00))
acc1 -= z10*(max(x10 , y10))
acc2 -= z20*(max(x20 , y20))
acc3 -= z30*(max(x30 , y30))
acc4 -= z40*(max(x40 , y40))
acc5 -= z50*(max(x50 , y50))
acc6 -= z60*(max(x60 , y60))
acc7 -= z70*(max(x70 , y70))

Parameters

Input/Output	Type	Comments
return	v8acc80	Returned accumulation vector (8 x int80 lanes)
acc	v8acc80	Incoming accumulation vector (8 x int80 lanes)
xbuff	v32int32	Input buffer of 32 elements of type int32
xstart	int	Starting position offset applied to all lanes of input from X buffer.
xoffsets	unsigned int	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
ystart	int	Starting position offset applied to all lanes for input from Y buffer.
zbuff	v8int32	Input buffer of 8 elements of type int32
zstart	int	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	unsigned int	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane

Note

For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
Parameter 'zstart' must be a compile time constant.

v8acc80 lmsc8_max	(	v8acc80	acc,
		v16int32	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	ystart,
		v8int32	zbuff,
		int	zstart,
		unsigned int	zoffsets
	)

Multiply-subtract intrinsic function after computing the maximum between the selected lanes from the input buffer using small X input buffer.

acc0 -= z00*(max(x00 , y00))
acc1 -= z10*(max(x10 , y10))
acc2 -= z20*(max(x20 , y20))
acc3 -= z30*(max(x30 , y30))
acc4 -= z40*(max(x40 , y40))
acc5 -= z50*(max(x50 , y50))
acc6 -= z60*(max(x60 , y60))
acc7 -= z70*(max(x70 , y70))

Parameters

Input/Output	Type	Comments
return	v8acc80	Returned accumulation vector (8 x int80 lanes)
acc	v8acc80	Incoming accumulation vector (8 x int80 lanes)
xbuff	v16int32	Input buffer of 16 elements of type int32
xstart	int	Starting position offset applied to all lanes of input from X buffer.
xoffsets	unsigned int	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
ystart	int	Starting position offset applied to all lanes for input from Y buffer.
zbuff	v8int32	Input buffer of 8 elements of type int32
zstart	int	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	unsigned int	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane

Note

For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
Parameter 'zstart' must be a compile time constant.

v8acc80 lmsc8_max	(	v8acc80	acc,
		v16int32	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		v16int32	ybuff,
		int	ystart,
		v8int32	zbuff,
		int	zstart,
		unsigned int	zoffsets
	)

Multiply-subtract intrinsic function after computing the maximum between the selected lanes from the input buffer using small X input buffer.

acc0 -= z00*(max(x00 , y00))
acc1 -= z10*(max(x10 , y10))
acc2 -= z20*(max(x20 , y20))
acc3 -= z30*(max(x30 , y30))
acc4 -= z40*(max(x40 , y40))
acc5 -= z50*(max(x50 , y50))
acc6 -= z60*(max(x60 , y60))
acc7 -= z70*(max(x70 , y70))

Parameters

Input/Output	Type	Comments
return	v8acc80	Returned accumulation vector (8 x int80 lanes)
acc	v8acc80	Incoming accumulation vector (8 x int80 lanes)
xbuff	v16int32	Input buffer of 16 elements of type int32
xstart	int	Starting position offset applied to all lanes of input from X buffer.
xoffsets	unsigned int	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
ybuff	v16int32	Right input buffer of 16 elements of type int32
ystart	int	Starting position offset applied to all lanes for input from Y buffer.
zbuff	v8int32	Input buffer of 8 elements of type int32
zstart	int	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	unsigned int	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane

Note

For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
Parameter 'zstart' must be a compile time constant.

v8acc80 lmsc8_maxdiff	(	v8acc80	acc,
		v32int32	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	ystart,
		v8int32	zbuff,
		int	zstart,
		unsigned int	zoffsets
	)

Multiply-subtract intrinsic function after computing the maximum difference between the selected lanes from the input buffer .

acc0 -= z00*((x00 - y00 > 0) ? (x00 - y00):0)
acc1 -= z10*((x10 - y10 > 0) ? (x10 - y10):0)
acc2 -= z20*((x20 - y20 > 0) ? (x20 - y20):0)
acc3 -= z30*((x30 - y30 > 0) ? (x30 - y30):0)
acc4 -= z40*((x40 - y40 > 0) ? (x40 - y40):0)
acc5 -= z50*((x50 - y50 > 0) ? (x50 - y50):0)
acc6 -= z60*((x60 - y60 > 0) ? (x60 - y60):0)
acc7 -= z70*((x70 - y70 > 0) ? (x70 - y70):0)

Parameters

Input/Output	Type	Comments
return	v8acc80	Returned accumulation vector (8 x int80 lanes)
acc	v8acc80	Incoming accumulation vector (8 x int80 lanes)
xbuff	v32int32	Input buffer of 32 elements of type int32
xstart	int	Starting position offset applied to all lanes of input from X buffer.
xoffsets	unsigned int	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
ystart	int	Starting position offset applied to all lanes for input from Y buffer.
zbuff	v8int32	Input buffer of 8 elements of type int32
zstart	int	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	unsigned int	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane

Note

For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
Parameter 'zstart' must be a compile time constant.

v8acc80 lmsc8_maxdiff	(	v8acc80	acc,
		v16int32	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	ystart,
		v8int32	zbuff,
		int	zstart,
		unsigned int	zoffsets
	)

Multiply-subtract intrinsic function after computing the maximum difference between the selected lanes from the input buffer using small X input buffer.

acc0 -= z00*((x00 - y00 > 0) ? (x00 - y00):0)
acc1 -= z10*((x10 - y10 > 0) ? (x10 - y10):0)
acc2 -= z20*((x20 - y20 > 0) ? (x20 - y20):0)
acc3 -= z30*((x30 - y30 > 0) ? (x30 - y30):0)
acc4 -= z40*((x40 - y40 > 0) ? (x40 - y40):0)
acc5 -= z50*((x50 - y50 > 0) ? (x50 - y50):0)
acc6 -= z60*((x60 - y60 > 0) ? (x60 - y60):0)
acc7 -= z70*((x70 - y70 > 0) ? (x70 - y70):0)

Parameters

Input/Output	Type	Comments
return	v8acc80	Returned accumulation vector (8 x int80 lanes)
acc	v8acc80	Incoming accumulation vector (8 x int80 lanes)
xbuff	v16int32	Input buffer of 16 elements of type int32
xstart	int	Starting position offset applied to all lanes of input from X buffer.
xoffsets	unsigned int	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
ystart	int	Starting position offset applied to all lanes for input from Y buffer.
zbuff	v8int32	Input buffer of 8 elements of type int32
zstart	int	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	unsigned int	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane

Note

For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
Parameter 'zstart' must be a compile time constant.

v8acc80 lmsc8_maxdiff	(	v8acc80	acc,
		v16int32	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		v16int32	ybuff,
		int	ystart,
		v8int32	zbuff,
		int	zstart,
		unsigned int	zoffsets
	)

Multiply-subtract intrinsic function after computing the maximum difference between the selected lanes from the input buffer using small X input buffer.

acc0 -= z00*((x00 - y00 > 0) ? (x00 - y00):0)
acc1 -= z10*((x10 - y10 > 0) ? (x10 - y10):0)
acc2 -= z20*((x20 - y20 > 0) ? (x20 - y20):0)
acc3 -= z30*((x30 - y30 > 0) ? (x30 - y30):0)
acc4 -= z40*((x40 - y40 > 0) ? (x40 - y40):0)
acc5 -= z50*((x50 - y50 > 0) ? (x50 - y50):0)
acc6 -= z60*((x60 - y60 > 0) ? (x60 - y60):0)
acc7 -= z70*((x70 - y70 > 0) ? (x70 - y70):0)

Parameters

Input/Output	Type	Comments
return	v8acc80	Returned accumulation vector (8 x int80 lanes)
acc	v8acc80	Incoming accumulation vector (8 x int80 lanes)
xbuff	v16int32	Input buffer of 16 elements of type int32
xstart	int	Starting position offset applied to all lanes of input from X buffer.
xoffsets	unsigned int	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
ybuff	v16int32	Right input buffer of 16 elements of type int32
ystart	int	Starting position offset applied to all lanes for input from Y buffer.
zbuff	v8int32	Input buffer of 8 elements of type int32
zstart	int	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	unsigned int	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane

Note

For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
Parameter 'zstart' must be a compile time constant.

v8acc80 lmsc8_min	(	v8acc80	acc,
		v32int32	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	ystart,
		v8int32	zbuff,
		int	zstart,
		unsigned int	zoffsets
	)

Multiply-subtract intrinsic function after computing the minimum between the selected lanes from the input buffer .

acc0 -= z00*(min(x00 , y00))
acc1 -= z10*(min(x10 , y10))
acc2 -= z20*(min(x20 , y20))
acc3 -= z30*(min(x30 , y30))
acc4 -= z40*(min(x40 , y40))
acc5 -= z50*(min(x50 , y50))
acc6 -= z60*(min(x60 , y60))
acc7 -= z70*(min(x70 , y70))

Parameters

Input/Output	Type	Comments
return	v8acc80	Returned accumulation vector (8 x int80 lanes)
acc	v8acc80	Incoming accumulation vector (8 x int80 lanes)
xbuff	v32int32	Input buffer of 32 elements of type int32
xstart	int	Starting position offset applied to all lanes of input from X buffer.
xoffsets	unsigned int	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
ystart	int	Starting position offset applied to all lanes for input from Y buffer.
zbuff	v8int32	Input buffer of 8 elements of type int32
zstart	int	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	unsigned int	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane

Note

For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
Parameter 'zstart' must be a compile time constant.

v8acc80 lmsc8_min	(	v8acc80	acc,
		v16int32	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	ystart,
		v8int32	zbuff,
		int	zstart,
		unsigned int	zoffsets
	)

Multiply-subtract intrinsic function after computing the minimum between the selected lanes from the input buffer using small X input buffer.

acc0 -= z00*(min(x00 , y00))
acc1 -= z10*(min(x10 , y10))
acc2 -= z20*(min(x20 , y20))
acc3 -= z30*(min(x30 , y30))
acc4 -= z40*(min(x40 , y40))
acc5 -= z50*(min(x50 , y50))
acc6 -= z60*(min(x60 , y60))
acc7 -= z70*(min(x70 , y70))

Parameters

Input/Output	Type	Comments
return	v8acc80	Returned accumulation vector (8 x int80 lanes)
acc	v8acc80	Incoming accumulation vector (8 x int80 lanes)
xbuff	v16int32	Input buffer of 16 elements of type int32
xstart	int	Starting position offset applied to all lanes of input from X buffer.
xoffsets	unsigned int	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
ystart	int	Starting position offset applied to all lanes for input from Y buffer.
zbuff	v8int32	Input buffer of 8 elements of type int32
zstart	int	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	unsigned int	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane

Note

For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
Parameter 'zstart' must be a compile time constant.

v8acc80 lmsc8_min	(	v8acc80	acc,
		v16int32	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		v16int32	ybuff,
		int	ystart,
		v8int32	zbuff,
		int	zstart,
		unsigned int	zoffsets
	)

Multiply-subtract intrinsic function after computing the minimum between the selected lanes from the input buffer using small X input buffer.

acc0 -= z00*(min(x00 , y00))
acc1 -= z10*(min(x10 , y10))
acc2 -= z20*(min(x20 , y20))
acc3 -= z30*(min(x30 , y30))
acc4 -= z40*(min(x40 , y40))
acc5 -= z50*(min(x50 , y50))
acc6 -= z60*(min(x60 , y60))
acc7 -= z70*(min(x70 , y70))

Parameters

Input/Output	Type	Comments
return	v8acc80	Returned accumulation vector (8 x int80 lanes)
acc	v8acc80	Incoming accumulation vector (8 x int80 lanes)
xbuff	v16int32	Input buffer of 16 elements of type int32
xstart	int	Starting position offset applied to all lanes of input from X buffer.
xoffsets	unsigned int	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
ybuff	v16int32	Right input buffer of 16 elements of type int32
ystart	int	Starting position offset applied to all lanes for input from Y buffer.
zbuff	v8int32	Input buffer of 8 elements of type int32
zstart	int	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	unsigned int	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane

Note

For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
Parameter 'zstart' must be a compile time constant.

v4acc80 lmul4_abs	(	v32int32	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	xstep,
		v8int32	zbuff,
		int	zstart,
		unsigned int	zoffsets,
		int	zstep
	)

Multiply intrinsic function after computing the absolute value in the selected lanes from the input buffer .

acc0 = z00*abs(x00) + z01*abs(x01)
acc1 = z10*abs(x10) + z11*abs(x11)
acc2 = z20*abs(x20) + z21*abs(x21)
acc3 = z30*abs(x30) + z31*abs(x31)

Parameters

Input/Output	Type	Comments
return	v4acc80	Returned accumulation vector (4 x int80 lanes)
xbuff	v32int32	Input buffer of 32 elements of type int32
xstart	int	Starting position offset applied to all lanes of input from X buffer.
xoffsets	unsigned int	4b offset for each lane, applied to the x buffer. LSB apply to first lane
xstep	unsigned int	Step between each column for selection in the xbuffer.
zbuff	v8int32	Input buffer of 8 elements of type int32
zstart	int	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	unsigned int	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane
zstep	int	Step between each column for selection in the zbuffer.

Note

For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
Parameter 'zstart' must be a compile time constant.

v4acc80 lmul4_abs	(	v16int32	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	xstep,
		v8int32	zbuff,
		int	zstart,
		unsigned int	zoffsets,
		int	zstep
	)

Multiply intrinsic function after computing the absolute value in the selected lanes from the input buffer using small X input buffer.

acc0 = z00*abs(x00) + z01*abs(x01)
acc1 = z10*abs(x10) + z11*abs(x11)
acc2 = z20*abs(x20) + z21*abs(x21)
acc3 = z30*abs(x30) + z31*abs(x31)

Parameters

Input/Output	Type	Comments
return	v4acc80	Returned accumulation vector (4 x int80 lanes)
xbuff	v16int32	Input buffer of 16 elements of type int32
xstart	int	Starting position offset applied to all lanes of input from X buffer.
xoffsets	unsigned int	4b offset for each lane, applied to the x buffer. LSB apply to first lane
xstep	unsigned int	Step between each column for selection in the xbuffer.
zbuff	v8int32	Input buffer of 8 elements of type int32
zstart	int	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	unsigned int	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane
zstep	int	Step between each column for selection in the zbuffer.

Note

For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
Parameter 'zstart' must be a compile time constant.

v4acc80 lmul4_max	(	v32int32	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	xstep,
		int	ystart,
		v8int32	zbuff,
		int	zstart,
		unsigned int	zoffsets,
		int	zstep
	)

Multiply intrinsic function after computing the maximum between the selected lanes from the input buffer .

acc0 = z00*(max(x00 , y00)) + z01*(max(x01 , y01))
acc1 = z10*(max(x10 , y10)) + z11*(max(x11 , y11))
acc2 = z20*(max(x20 , y20)) + z21*(max(x21 , y21))
acc3 = z30*(max(x30 , y30)) + z31*(max(x31 , y31))

Parameters

Input/Output	Type	Comments
return	v4acc80	Returned accumulation vector (4 x int80 lanes)
xbuff	v32int32	Input buffer of 32 elements of type int32
xstart	int	Starting position offset applied to all lanes of input from X buffer.
xoffsets	unsigned int	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
xstep	unsigned int	Step between each column for selection in the x and y buffers. Ystep is symmetric to xstep (ystep advances by -xstep).
ystart	int	Starting position offset applied to all lanes for input from Y buffer.
zbuff	v8int32	Input buffer of 8 elements of type int32
zstart	int	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	unsigned int	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane
zstep	int	Step between each column for selection in the zbuffer.

Note

For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
Parameter 'zstart' must be a compile time constant.

v4acc80 lmul4_max	(	v16int32	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	xstep,
		int	ystart,
		v8int32	zbuff,
		int	zstart,
		unsigned int	zoffsets,
		int	zstep
	)

Multiply intrinsic function after computing the maximum between the selected lanes from the input buffer using small X input buffer.

acc0 = z00*(max(x00 , y00)) + z01*(max(x01 , y01))
acc1 = z10*(max(x10 , y10)) + z11*(max(x11 , y11))
acc2 = z20*(max(x20 , y20)) + z21*(max(x21 , y21))
acc3 = z30*(max(x30 , y30)) + z31*(max(x31 , y31))

Parameters

Input/Output	Type	Comments
return	v4acc80	Returned accumulation vector (4 x int80 lanes)
xbuff	v16int32	Input buffer of 16 elements of type int32
xstart	int	Starting position offset applied to all lanes of input from X buffer.
xoffsets	unsigned int	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
xstep	unsigned int	Step between each column for selection in the x and y buffers. Ystep is symmetric to xstep (ystep advances by -xstep).
ystart	int	Starting position offset applied to all lanes for input from Y buffer.
zbuff	v8int32	Input buffer of 8 elements of type int32
zstart	int	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	unsigned int	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane
zstep	int	Step between each column for selection in the zbuffer.

Note

For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
Parameter 'zstart' must be a compile time constant.

v4acc80 lmul4_max	(	v16int32	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	xstep,
		v16int32	ybuff,
		int	ystart,
		v8int32	zbuff,
		int	zstart,
		unsigned int	zoffsets,
		int	zstep
	)

Multiply intrinsic function after computing the maximum between the selected lanes from the input buffer using small X input buffer.

acc0 = z00*(max(x00 , y00)) + z01*(max(x01 , y01))
acc1 = z10*(max(x10 , y10)) + z11*(max(x11 , y11))
acc2 = z20*(max(x20 , y20)) + z21*(max(x21 , y21))
acc3 = z30*(max(x30 , y30)) + z31*(max(x31 , y31))

Parameters

Input/Output	Type	Comments
return	v4acc80	Returned accumulation vector (4 x int80 lanes)
xbuff	v16int32	Input buffer of 16 elements of type int32
xstart	int	Starting position offset applied to all lanes of input from X buffer.
xoffsets	unsigned int	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
xstep	unsigned int	Step between each column for selection in the x and y buffers. Ystep is symmetric to xstep (ystep advances by -xstep).
ybuff	v16int32	Right input buffer of 16 elements of type int32
ystart	int	Starting position offset applied to all lanes for input from Y buffer.
zbuff	v8int32	Input buffer of 8 elements of type int32
zstart	int	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	unsigned int	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane
zstep	int	Step between each column for selection in the zbuffer.

Note

For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
Parameter 'zstart' must be a compile time constant.

v4acc80 lmul4_maxdiff	(	v32int32	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	xstep,
		int	ystart,
		v8int32	zbuff,
		int	zstart,
		unsigned int	zoffsets,
		int	zstep
	)

Multiply intrinsic function after computing the maximum difference between the selected lanes from the input buffer .

acc0 = z00*((x00 - y00 > 0) ? (x00 - y00):0) + z01*((x01 - y01 > 0) ? (x01 - y01):0)
acc1 = z10*((x10 - y10 > 0) ? (x10 - y10):0) + z11*((x11 - y11 > 0) ? (x11 - y11):0)
acc2 = z20*((x20 - y20 > 0) ? (x20 - y20):0) + z21*((x21 - y21 > 0) ? (x21 - y21):0)
acc3 = z30*((x30 - y30 > 0) ? (x30 - y30):0) + z31*((x31 - y31 > 0) ? (x31 - y31):0)

Parameters

Input/Output	Type	Comments
return	v4acc80	Returned accumulation vector (4 x int80 lanes)
xbuff	v32int32	Input buffer of 32 elements of type int32
xstart	int	Starting position offset applied to all lanes of input from X buffer.
xoffsets	unsigned int	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
xstep	unsigned int	Step between each column for selection in the x and y buffers. Ystep is symmetric to xstep (ystep advances by -xstep).
ystart	int	Starting position offset applied to all lanes for input from Y buffer.
zbuff	v8int32	Input buffer of 8 elements of type int32
zstart	int	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	unsigned int	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane
zstep	int	Step between each column for selection in the zbuffer.

Note

For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
Parameter 'zstart' must be a compile time constant.

v4acc80 lmul4_maxdiff	(	v16int32	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	xstep,
		int	ystart,
		v8int32	zbuff,
		int	zstart,
		unsigned int	zoffsets,
		int	zstep
	)

Multiply intrinsic function after computing the maximum difference between the selected lanes from the input buffer using small X input buffer.

acc0 = z00*((x00 - y00 > 0) ? (x00 - y00):0) + z01*((x01 - y01 > 0) ? (x01 - y01):0)
acc1 = z10*((x10 - y10 > 0) ? (x10 - y10):0) + z11*((x11 - y11 > 0) ? (x11 - y11):0)
acc2 = z20*((x20 - y20 > 0) ? (x20 - y20):0) + z21*((x21 - y21 > 0) ? (x21 - y21):0)
acc3 = z30*((x30 - y30 > 0) ? (x30 - y30):0) + z31*((x31 - y31 > 0) ? (x31 - y31):0)

Parameters

Input/Output	Type	Comments
return	v4acc80	Returned accumulation vector (4 x int80 lanes)
xbuff	v16int32	Input buffer of 16 elements of type int32
xstart	int	Starting position offset applied to all lanes of input from X buffer.
xoffsets	unsigned int	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
xstep	unsigned int	Step between each column for selection in the x and y buffers. Ystep is symmetric to xstep (ystep advances by -xstep).
ystart	int	Starting position offset applied to all lanes for input from Y buffer.
zbuff	v8int32	Input buffer of 8 elements of type int32
zstart	int	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	unsigned int	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane
zstep	int	Step between each column for selection in the zbuffer.

Note

For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
Parameter 'zstart' must be a compile time constant.

v4acc80 lmul4_maxdiff	(	v16int32	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	xstep,
		v16int32	ybuff,
		int	ystart,
		v8int32	zbuff,
		int	zstart,
		unsigned int	zoffsets,
		int	zstep
	)

Multiply intrinsic function after computing the maximum difference between the selected lanes from the input buffer using small X input buffer.

acc0 = z00*((x00 - y00 > 0) ? (x00 - y00):0) + z01*((x01 - y01 > 0) ? (x01 - y01):0)
acc1 = z10*((x10 - y10 > 0) ? (x10 - y10):0) + z11*((x11 - y11 > 0) ? (x11 - y11):0)
acc2 = z20*((x20 - y20 > 0) ? (x20 - y20):0) + z21*((x21 - y21 > 0) ? (x21 - y21):0)
acc3 = z30*((x30 - y30 > 0) ? (x30 - y30):0) + z31*((x31 - y31 > 0) ? (x31 - y31):0)

Parameters

Input/Output	Type	Comments
return	v4acc80	Returned accumulation vector (4 x int80 lanes)
xbuff	v16int32	Input buffer of 16 elements of type int32
xstart	int	Starting position offset applied to all lanes of input from X buffer.
xoffsets	unsigned int	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
xstep	unsigned int	Step between each column for selection in the x and y buffers. Ystep is symmetric to xstep (ystep advances by -xstep).
ybuff	v16int32	Right input buffer of 16 elements of type int32
ystart	int	Starting position offset applied to all lanes for input from Y buffer.
zbuff	v8int32	Input buffer of 8 elements of type int32
zstart	int	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	unsigned int	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane
zstep	int	Step between each column for selection in the zbuffer.

Note

For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
Parameter 'zstart' must be a compile time constant.

v4acc80 lmul4_min	(	v32int32	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	xstep,
		int	ystart,
		v8int32	zbuff,
		int	zstart,
		unsigned int	zoffsets,
		int	zstep
	)

Multiply intrinsic function after computing the minimum between the selected lanes from the input buffer .

acc0 = z00*(min(x00 , y00)) + z01*(min(x01 , y01))
acc1 = z10*(min(x10 , y10)) + z11*(min(x11 , y11))
acc2 = z20*(min(x20 , y20)) + z21*(min(x21 , y21))
acc3 = z30*(min(x30 , y30)) + z31*(min(x31 , y31))

Parameters

Input/Output	Type	Comments
return	v4acc80	Returned accumulation vector (4 x int80 lanes)
xbuff	v32int32	Input buffer of 32 elements of type int32
xstart	int	Starting position offset applied to all lanes of input from X buffer.
xoffsets	unsigned int	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
xstep	unsigned int	Step between each column for selection in the x and y buffers. Ystep is symmetric to xstep (ystep advances by -xstep).
ystart	int	Starting position offset applied to all lanes for input from Y buffer.
zbuff	v8int32	Input buffer of 8 elements of type int32
zstart	int	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	unsigned int	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane
zstep	int	Step between each column for selection in the zbuffer.

Note

For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
Parameter 'zstart' must be a compile time constant.

v4acc80 lmul4_min	(	v16int32	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	xstep,
		int	ystart,
		v8int32	zbuff,
		int	zstart,
		unsigned int	zoffsets,
		int	zstep
	)

Multiply intrinsic function after computing the minimum between the selected lanes from the input buffer using small X input buffer.

acc0 = z00*(min(x00 , y00)) + z01*(min(x01 , y01))
acc1 = z10*(min(x10 , y10)) + z11*(min(x11 , y11))
acc2 = z20*(min(x20 , y20)) + z21*(min(x21 , y21))
acc3 = z30*(min(x30 , y30)) + z31*(min(x31 , y31))

Parameters

Input/Output	Type	Comments
return	v4acc80	Returned accumulation vector (4 x int80 lanes)
xbuff	v16int32	Input buffer of 16 elements of type int32
xstart	int	Starting position offset applied to all lanes of input from X buffer.
xoffsets	unsigned int	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
xstep	unsigned int	Step between each column for selection in the x and y buffers. Ystep is symmetric to xstep (ystep advances by -xstep).
ystart	int	Starting position offset applied to all lanes for input from Y buffer.
zbuff	v8int32	Input buffer of 8 elements of type int32
zstart	int	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	unsigned int	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane
zstep	int	Step between each column for selection in the zbuffer.

Note

For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
Parameter 'zstart' must be a compile time constant.

v4acc80 lmul4_min	(	v16int32	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	xstep,
		v16int32	ybuff,
		int	ystart,
		v8int32	zbuff,
		int	zstart,
		unsigned int	zoffsets,
		int	zstep
	)

Multiply intrinsic function after computing the minimum between the selected lanes from the input buffer using small X input buffer.

acc0 = z00*(min(x00 , y00)) + z01*(min(x01 , y01))
acc1 = z10*(min(x10 , y10)) + z11*(min(x11 , y11))
acc2 = z20*(min(x20 , y20)) + z21*(min(x21 , y21))
acc3 = z30*(min(x30 , y30)) + z31*(min(x31 , y31))

Parameters

Input/Output	Type	Comments
return	v4acc80	Returned accumulation vector (4 x int80 lanes)
xbuff	v16int32	Input buffer of 16 elements of type int32
xstart	int	Starting position offset applied to all lanes of input from X buffer.
xoffsets	unsigned int	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
xstep	unsigned int	Step between each column for selection in the x and y buffers. Ystep is symmetric to xstep (ystep advances by -xstep).
ybuff	v16int32	Right input buffer of 16 elements of type int32
ystart	int	Starting position offset applied to all lanes for input from Y buffer.
zbuff	v8int32	Input buffer of 8 elements of type int32
zstart	int	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	unsigned int	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane
zstep	int	Step between each column for selection in the zbuffer.

Note

For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
Parameter 'zstart' must be a compile time constant.

v8acc80 lmul8_abs	(	v32int32	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		v8int32	zbuff,
		int	zstart,
		unsigned int	zoffsets
	)

Multiply intrinsic function after computing the absolute value in the selected lanes from the input buffer .

acc0 = z00*abs(x00)
acc1 = z10*abs(x10)
acc2 = z20*abs(x20)
acc3 = z30*abs(x30)
acc4 = z40*abs(x40)
acc5 = z50*abs(x50)
acc6 = z60*abs(x60)
acc7 = z70*abs(x70)

Parameters

Input/Output	Type	Comments
return	v8acc80	Returned accumulation vector (8 x int80 lanes)
xbuff	v32int32	Input buffer of 32 elements of type int32
xstart	int	Starting position offset applied to all lanes of input from X buffer.
xoffsets	unsigned int	4b offset for each lane, applied to the x buffer. LSB apply to first lane
zbuff	v8int32	Input buffer of 8 elements of type int32
zstart	int	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	unsigned int	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane

Note

For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
Parameter 'zstart' must be a compile time constant.

v8acc80 lmul8_abs	(	v16int32	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		v8int32	zbuff,
		int	zstart,
		unsigned int	zoffsets
	)

Multiply intrinsic function after computing the absolute value in the selected lanes from the input buffer using small X input buffer.

acc0 = z00*abs(x00)
acc1 = z10*abs(x10)
acc2 = z20*abs(x20)
acc3 = z30*abs(x30)
acc4 = z40*abs(x40)
acc5 = z50*abs(x50)
acc6 = z60*abs(x60)
acc7 = z70*abs(x70)

Parameters

Input/Output	Type	Comments
return	v8acc80	Returned accumulation vector (8 x int80 lanes)
xbuff	v16int32	Input buffer of 16 elements of type int32
xstart	int	Starting position offset applied to all lanes of input from X buffer.
xoffsets	unsigned int	4b offset for each lane, applied to the x buffer. LSB apply to first lane
zbuff	v8int32	Input buffer of 8 elements of type int32
zstart	int	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	unsigned int	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane

Note

For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
Parameter 'zstart' must be a compile time constant.

v8acc80 lmul8_max	(	v32int32	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	ystart,
		v8int32	zbuff,
		int	zstart,
		unsigned int	zoffsets
	)

Multiply intrinsic function after computing the maximum between the selected lanes from the input buffer .

acc0 = z00*(max(x00 , y00))
acc1 = z10*(max(x10 , y10))
acc2 = z20*(max(x20 , y20))
acc3 = z30*(max(x30 , y30))
acc4 = z40*(max(x40 , y40))
acc5 = z50*(max(x50 , y50))
acc6 = z60*(max(x60 , y60))
acc7 = z70*(max(x70 , y70))

Parameters

Input/Output	Type	Comments
return	v8acc80	Returned accumulation vector (8 x int80 lanes)
xbuff	v32int32	Input buffer of 32 elements of type int32
xstart	int	Starting position offset applied to all lanes of input from X buffer.
xoffsets	unsigned int	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
ystart	int	Starting position offset applied to all lanes for input from Y buffer.
zbuff	v8int32	Input buffer of 8 elements of type int32
zstart	int	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	unsigned int	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane

Note

For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
Parameter 'zstart' must be a compile time constant.

v8acc80 lmul8_max	(	v16int32	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	ystart,
		v8int32	zbuff,
		int	zstart,
		unsigned int	zoffsets
	)

Multiply intrinsic function after computing the maximum between the selected lanes from the input buffer using small X input buffer.

acc0 = z00*(max(x00 , y00))
acc1 = z10*(max(x10 , y10))
acc2 = z20*(max(x20 , y20))
acc3 = z30*(max(x30 , y30))
acc4 = z40*(max(x40 , y40))
acc5 = z50*(max(x50 , y50))
acc6 = z60*(max(x60 , y60))
acc7 = z70*(max(x70 , y70))

Parameters

Input/Output	Type	Comments
return	v8acc80	Returned accumulation vector (8 x int80 lanes)
xbuff	v16int32	Input buffer of 16 elements of type int32
xstart	int	Starting position offset applied to all lanes of input from X buffer.
xoffsets	unsigned int	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
ystart	int	Starting position offset applied to all lanes for input from Y buffer.
zbuff	v8int32	Input buffer of 8 elements of type int32
zstart	int	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	unsigned int	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane

Note

For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
Parameter 'zstart' must be a compile time constant.

v8acc80 lmul8_max	(	v16int32	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		v16int32	ybuff,
		int	ystart,
		v8int32	zbuff,
		int	zstart,
		unsigned int	zoffsets
	)

Multiply intrinsic function after computing the maximum between the selected lanes from the input buffer using small X input buffer.

acc0 = z00*(max(x00 , y00))
acc1 = z10*(max(x10 , y10))
acc2 = z20*(max(x20 , y20))
acc3 = z30*(max(x30 , y30))
acc4 = z40*(max(x40 , y40))
acc5 = z50*(max(x50 , y50))
acc6 = z60*(max(x60 , y60))
acc7 = z70*(max(x70 , y70))

Parameters

Input/Output	Type	Comments
return	v8acc80	Returned accumulation vector (8 x int80 lanes)
xbuff	v16int32	Input buffer of 16 elements of type int32
xstart	int	Starting position offset applied to all lanes of input from X buffer.
xoffsets	unsigned int	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
ybuff	v16int32	Right input buffer of 16 elements of type int32
ystart	int	Starting position offset applied to all lanes for input from Y buffer.
zbuff	v8int32	Input buffer of 8 elements of type int32
zstart	int	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	unsigned int	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane

Note

For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
Parameter 'zstart' must be a compile time constant.

v8acc80 lmul8_maxdiff	(	v32int32	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	ystart,
		v8int32	zbuff,
		int	zstart,
		unsigned int	zoffsets
	)

Multiply intrinsic function after computing the maximum difference between the selected lanes from the input buffer .

acc0 = z00*((x00 - y00 > 0) ? (x00 - y00):0)
acc1 = z10*((x10 - y10 > 0) ? (x10 - y10):0)
acc2 = z20*((x20 - y20 > 0) ? (x20 - y20):0)
acc3 = z30*((x30 - y30 > 0) ? (x30 - y30):0)
acc4 = z40*((x40 - y40 > 0) ? (x40 - y40):0)
acc5 = z50*((x50 - y50 > 0) ? (x50 - y50):0)
acc6 = z60*((x60 - y60 > 0) ? (x60 - y60):0)
acc7 = z70*((x70 - y70 > 0) ? (x70 - y70):0)

Parameters

Input/Output	Type	Comments
return	v8acc80	Returned accumulation vector (8 x int80 lanes)
xbuff	v32int32	Input buffer of 32 elements of type int32
xstart	int	Starting position offset applied to all lanes of input from X buffer.
xoffsets	unsigned int	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
ystart	int	Starting position offset applied to all lanes for input from Y buffer.
zbuff	v8int32	Input buffer of 8 elements of type int32
zstart	int	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	unsigned int	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane

Note

For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
Parameter 'zstart' must be a compile time constant.

v8acc80 lmul8_maxdiff	(	v16int32	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	ystart,
		v8int32	zbuff,
		int	zstart,
		unsigned int	zoffsets
	)

Multiply intrinsic function after computing the maximum difference between the selected lanes from the input buffer using small X input buffer.

acc0 = z00*((x00 - y00 > 0) ? (x00 - y00):0)
acc1 = z10*((x10 - y10 > 0) ? (x10 - y10):0)
acc2 = z20*((x20 - y20 > 0) ? (x20 - y20):0)
acc3 = z30*((x30 - y30 > 0) ? (x30 - y30):0)
acc4 = z40*((x40 - y40 > 0) ? (x40 - y40):0)
acc5 = z50*((x50 - y50 > 0) ? (x50 - y50):0)
acc6 = z60*((x60 - y60 > 0) ? (x60 - y60):0)
acc7 = z70*((x70 - y70 > 0) ? (x70 - y70):0)

Parameters

Input/Output	Type	Comments
return	v8acc80	Returned accumulation vector (8 x int80 lanes)
xbuff	v16int32	Input buffer of 16 elements of type int32
xstart	int	Starting position offset applied to all lanes of input from X buffer.
xoffsets	unsigned int	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
ystart	int	Starting position offset applied to all lanes for input from Y buffer.
zbuff	v8int32	Input buffer of 8 elements of type int32
zstart	int	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	unsigned int	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane

Note

For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
Parameter 'zstart' must be a compile time constant.

v8acc80 lmul8_maxdiff	(	v16int32	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		v16int32	ybuff,
		int	ystart,
		v8int32	zbuff,
		int	zstart,
		unsigned int	zoffsets
	)

Multiply intrinsic function after computing the maximum difference between the selected lanes from the input buffer using small X input buffer.

acc0 = z00*((x00 - y00 > 0) ? (x00 - y00):0)
acc1 = z10*((x10 - y10 > 0) ? (x10 - y10):0)
acc2 = z20*((x20 - y20 > 0) ? (x20 - y20):0)
acc3 = z30*((x30 - y30 > 0) ? (x30 - y30):0)
acc4 = z40*((x40 - y40 > 0) ? (x40 - y40):0)
acc5 = z50*((x50 - y50 > 0) ? (x50 - y50):0)
acc6 = z60*((x60 - y60 > 0) ? (x60 - y60):0)
acc7 = z70*((x70 - y70 > 0) ? (x70 - y70):0)

Parameters

Input/Output	Type	Comments
return	v8acc80	Returned accumulation vector (8 x int80 lanes)
xbuff	v16int32	Input buffer of 16 elements of type int32
xstart	int	Starting position offset applied to all lanes of input from X buffer.
xoffsets	unsigned int	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
ybuff	v16int32	Right input buffer of 16 elements of type int32
ystart	int	Starting position offset applied to all lanes for input from Y buffer.
zbuff	v8int32	Input buffer of 8 elements of type int32
zstart	int	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	unsigned int	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane

Note

For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
Parameter 'zstart' must be a compile time constant.

v8acc80 lmul8_min	(	v32int32	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	ystart,
		v8int32	zbuff,
		int	zstart,
		unsigned int	zoffsets
	)

Multiply intrinsic function after computing the minimum between the selected lanes from the input buffer .

acc0 = z00*(min(x00 , y00))
acc1 = z10*(min(x10 , y10))
acc2 = z20*(min(x20 , y20))
acc3 = z30*(min(x30 , y30))
acc4 = z40*(min(x40 , y40))
acc5 = z50*(min(x50 , y50))
acc6 = z60*(min(x60 , y60))
acc7 = z70*(min(x70 , y70))

Parameters

Input/Output	Type	Comments
return	v8acc80	Returned accumulation vector (8 x int80 lanes)
xbuff	v32int32	Input buffer of 32 elements of type int32
xstart	int	Starting position offset applied to all lanes of input from X buffer.
xoffsets	unsigned int	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
ystart	int	Starting position offset applied to all lanes for input from Y buffer.
zbuff	v8int32	Input buffer of 8 elements of type int32
zstart	int	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	unsigned int	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane

Note

For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
Parameter 'zstart' must be a compile time constant.

v8acc80 lmul8_min	(	v16int32	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	ystart,
		v8int32	zbuff,
		int	zstart,
		unsigned int	zoffsets
	)

Multiply intrinsic function after computing the minimum between the selected lanes from the input buffer using small X input buffer.

acc0 = z00*(min(x00 , y00))
acc1 = z10*(min(x10 , y10))
acc2 = z20*(min(x20 , y20))
acc3 = z30*(min(x30 , y30))
acc4 = z40*(min(x40 , y40))
acc5 = z50*(min(x50 , y50))
acc6 = z60*(min(x60 , y60))
acc7 = z70*(min(x70 , y70))

Parameters

Input/Output	Type	Comments
return	v8acc80	Returned accumulation vector (8 x int80 lanes)
xbuff	v16int32	Input buffer of 16 elements of type int32
xstart	int	Starting position offset applied to all lanes of input from X buffer.
xoffsets	unsigned int	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
ystart	int	Starting position offset applied to all lanes for input from Y buffer.
zbuff	v8int32	Input buffer of 8 elements of type int32
zstart	int	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	unsigned int	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane

Note

For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
Parameter 'zstart' must be a compile time constant.

v8acc80 lmul8_min	(	v16int32	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		v16int32	ybuff,
		int	ystart,
		v8int32	zbuff,
		int	zstart,
		unsigned int	zoffsets
	)

Multiply intrinsic function after computing the minimum between the selected lanes from the input buffer using small X input buffer.

acc0 = z00*(min(x00 , y00))
acc1 = z10*(min(x10 , y10))
acc2 = z20*(min(x20 , y20))
acc3 = z30*(min(x30 , y30))
acc4 = z40*(min(x40 , y40))
acc5 = z50*(min(x50 , y50))
acc6 = z60*(min(x60 , y60))
acc7 = z70*(min(x70 , y70))

Parameters

Input/Output	Type	Comments
return	v8acc80	Returned accumulation vector (8 x int80 lanes)
xbuff	v16int32	Input buffer of 16 elements of type int32
xstart	int	Starting position offset applied to all lanes of input from X buffer.
xoffsets	unsigned int	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
ybuff	v16int32	Right input buffer of 16 elements of type int32
ystart	int	Starting position offset applied to all lanes for input from Y buffer.
zbuff	v8int32	Input buffer of 8 elements of type int32
zstart	int	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	unsigned int	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane

Note

For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
Parameter 'zstart' must be a compile time constant.

v4acc80 lnegmul4_abs	(	v32int32	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	xstep,
		v8int32	zbuff,
		int	zstart,
		unsigned int	zoffsets,
		int	zstep
	)

Multiply-negate intrinsic function after computing the absolute value in the selected lanes from the input buffer .

acc0 = -( z00*abs(x00) + z01*abs(x01) )
acc1 = -( z10*abs(x10) + z11*abs(x11) )
acc2 = -( z20*abs(x20) + z21*abs(x21) )
acc3 = -( z30*abs(x30) + z31*abs(x31) )

Parameters

Input/Output	Type	Comments
return	v4acc80	Returned accumulation vector (4 x int80 lanes)
xbuff	v32int32	Input buffer of 32 elements of type int32
xstart	int	Starting position offset applied to all lanes of input from X buffer.
xoffsets	unsigned int	4b offset for each lane, applied to the x buffer. LSB apply to first lane
xstep	unsigned int	Step between each column for selection in the xbuffer.
zbuff	v8int32	Input buffer of 8 elements of type int32
zstart	int	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	unsigned int	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane
zstep	int	Step between each column for selection in the zbuffer.

Note

For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
Parameter 'zstart' must be a compile time constant.

v4acc80 lnegmul4_abs	(	v16int32	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	xstep,
		v8int32	zbuff,
		int	zstart,
		unsigned int	zoffsets,
		int	zstep
	)

Multiply-negate intrinsic function after computing the absolute value in the selected lanes from the input buffer using small X input buffer.

acc0 = -( z00*abs(x00) + z01*abs(x01) )
acc1 = -( z10*abs(x10) + z11*abs(x11) )
acc2 = -( z20*abs(x20) + z21*abs(x21) )
acc3 = -( z30*abs(x30) + z31*abs(x31) )

Parameters

Input/Output	Type	Comments
return	v4acc80	Returned accumulation vector (4 x int80 lanes)
xbuff	v16int32	Input buffer of 16 elements of type int32
xstart	int	Starting position offset applied to all lanes of input from X buffer.
xoffsets	unsigned int	4b offset for each lane, applied to the x buffer. LSB apply to first lane
xstep	unsigned int	Step between each column for selection in the xbuffer.
zbuff	v8int32	Input buffer of 8 elements of type int32
zstart	int	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	unsigned int	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane
zstep	int	Step between each column for selection in the zbuffer.

Note

For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
Parameter 'zstart' must be a compile time constant.

v4acc80 lnegmul4_max	(	v32int32	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	xstep,
		int	ystart,
		v8int32	zbuff,
		int	zstart,
		unsigned int	zoffsets,
		int	zstep
	)

Multiply-negate intrinsic function after computing the maximum between the selected lanes from the input buffer .

acc0 = -( z00*(max(x00 , y00)) + z01*(max(x01 , y01)) )
acc1 = -( z10*(max(x10 , y10)) + z11*(max(x11 , y11)) )
acc2 = -( z20*(max(x20 , y20)) + z21*(max(x21 , y21)) )
acc3 = -( z30*(max(x30 , y30)) + z31*(max(x31 , y31)) )

Parameters

Input/Output	Type	Comments
return	v4acc80	Returned accumulation vector (4 x int80 lanes)
xbuff	v32int32	Input buffer of 32 elements of type int32
xstart	int	Starting position offset applied to all lanes of input from X buffer.
xoffsets	unsigned int	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
xstep	unsigned int	Step between each column for selection in the x and y buffers. Ystep is symmetric to xstep (ystep advances by -xstep).
ystart	int	Starting position offset applied to all lanes for input from Y buffer.
zbuff	v8int32	Input buffer of 8 elements of type int32
zstart	int	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	unsigned int	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane
zstep	int	Step between each column for selection in the zbuffer.

Note

For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
Parameter 'zstart' must be a compile time constant.

v4acc80 lnegmul4_max	(	v16int32	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	xstep,
		int	ystart,
		v8int32	zbuff,
		int	zstart,
		unsigned int	zoffsets,
		int	zstep
	)

Multiply-negate intrinsic function after computing the maximum between the selected lanes from the input buffer using small X input buffer.

acc0 = -( z00*(max(x00 , y00)) + z01*(max(x01 , y01)) )
acc1 = -( z10*(max(x10 , y10)) + z11*(max(x11 , y11)) )
acc2 = -( z20*(max(x20 , y20)) + z21*(max(x21 , y21)) )
acc3 = -( z30*(max(x30 , y30)) + z31*(max(x31 , y31)) )

Parameters

Input/Output	Type	Comments
return	v4acc80	Returned accumulation vector (4 x int80 lanes)
xbuff	v16int32	Input buffer of 16 elements of type int32
xstart	int	Starting position offset applied to all lanes of input from X buffer.
xoffsets	unsigned int	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
xstep	unsigned int	Step between each column for selection in the x and y buffers. Ystep is symmetric to xstep (ystep advances by -xstep).
ystart	int	Starting position offset applied to all lanes for input from Y buffer.
zbuff	v8int32	Input buffer of 8 elements of type int32
zstart	int	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	unsigned int	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane
zstep	int	Step between each column for selection in the zbuffer.

Note

For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
Parameter 'zstart' must be a compile time constant.

v4acc80 lnegmul4_max	(	v16int32	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	xstep,
		v16int32	ybuff,
		int	ystart,
		v8int32	zbuff,
		int	zstart,
		unsigned int	zoffsets,
		int	zstep
	)

Multiply-negate intrinsic function after computing the maximum between the selected lanes from the input buffer using small X input buffer.

acc0 = -( z00*(max(x00 , y00)) + z01*(max(x01 , y01)) )
acc1 = -( z10*(max(x10 , y10)) + z11*(max(x11 , y11)) )
acc2 = -( z20*(max(x20 , y20)) + z21*(max(x21 , y21)) )
acc3 = -( z30*(max(x30 , y30)) + z31*(max(x31 , y31)) )

Parameters

Input/Output	Type	Comments
return	v4acc80	Returned accumulation vector (4 x int80 lanes)
xbuff	v16int32	Input buffer of 16 elements of type int32
xstart	int	Starting position offset applied to all lanes of input from X buffer.
xoffsets	unsigned int	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
xstep	unsigned int	Step between each column for selection in the x and y buffers. Ystep is symmetric to xstep (ystep advances by -xstep).
ybuff	v16int32	Right input buffer of 16 elements of type int32
ystart	int	Starting position offset applied to all lanes for input from Y buffer.
zbuff	v8int32	Input buffer of 8 elements of type int32
zstart	int	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	unsigned int	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane
zstep	int	Step between each column for selection in the zbuffer.

Note

For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
Parameter 'zstart' must be a compile time constant.

v4acc80 lnegmul4_maxdiff	(	v32int32	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	xstep,
		int	ystart,
		v8int32	zbuff,
		int	zstart,
		unsigned int	zoffsets,
		int	zstep
	)

Multiply-negate intrinsic function after computing the maximum difference between the selected lanes from the input buffer .

acc0 = -( z00*((x00 - y00 > 0) ? (x00 - y00):0) + z01*((x01 - y01 > 0) ? (x01 - y01):0) )
acc1 = -( z10*((x10 - y10 > 0) ? (x10 - y10):0) + z11*((x11 - y11 > 0) ? (x11 - y11):0) )
acc2 = -( z20*((x20 - y20 > 0) ? (x20 - y20):0) + z21*((x21 - y21 > 0) ? (x21 - y21):0) )
acc3 = -( z30*((x30 - y30 > 0) ? (x30 - y30):0) + z31*((x31 - y31 > 0) ? (x31 - y31):0) )

Parameters

Input/Output	Type	Comments
return	v4acc80	Returned accumulation vector (4 x int80 lanes)
xbuff	v32int32	Input buffer of 32 elements of type int32
xstart	int	Starting position offset applied to all lanes of input from X buffer.
xoffsets	unsigned int	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
xstep	unsigned int	Step between each column for selection in the x and y buffers. Ystep is symmetric to xstep (ystep advances by -xstep).
ystart	int	Starting position offset applied to all lanes for input from Y buffer.
zbuff	v8int32	Input buffer of 8 elements of type int32
zstart	int	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	unsigned int	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane
zstep	int	Step between each column for selection in the zbuffer.

Note

For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
Parameter 'zstart' must be a compile time constant.

v4acc80 lnegmul4_maxdiff	(	v16int32	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	xstep,
		int	ystart,
		v8int32	zbuff,
		int	zstart,
		unsigned int	zoffsets,
		int	zstep
	)

Multiply-negate intrinsic function after computing the maximum difference between the selected lanes from the input buffer using small X input buffer.

acc0 = -( z00*((x00 - y00 > 0) ? (x00 - y00):0) + z01*((x01 - y01 > 0) ? (x01 - y01):0) )
acc1 = -( z10*((x10 - y10 > 0) ? (x10 - y10):0) + z11*((x11 - y11 > 0) ? (x11 - y11):0) )
acc2 = -( z20*((x20 - y20 > 0) ? (x20 - y20):0) + z21*((x21 - y21 > 0) ? (x21 - y21):0) )
acc3 = -( z30*((x30 - y30 > 0) ? (x30 - y30):0) + z31*((x31 - y31 > 0) ? (x31 - y31):0) )

Parameters

Input/Output	Type	Comments
return	v4acc80	Returned accumulation vector (4 x int80 lanes)
xbuff	v16int32	Input buffer of 16 elements of type int32
xstart	int	Starting position offset applied to all lanes of input from X buffer.
xoffsets	unsigned int	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
xstep	unsigned int	Step between each column for selection in the x and y buffers. Ystep is symmetric to xstep (ystep advances by -xstep).
ystart	int	Starting position offset applied to all lanes for input from Y buffer.
zbuff	v8int32	Input buffer of 8 elements of type int32
zstart	int	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	unsigned int	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane
zstep	int	Step between each column for selection in the zbuffer.

Note

For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
Parameter 'zstart' must be a compile time constant.

v4acc80 lnegmul4_maxdiff	(	v16int32	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	xstep,
		v16int32	ybuff,
		int	ystart,
		v8int32	zbuff,
		int	zstart,
		unsigned int	zoffsets,
		int	zstep
	)

Multiply-negate intrinsic function after computing the maximum difference between the selected lanes from the input buffer using small X input buffer.

acc0 = -( z00*((x00 - y00 > 0) ? (x00 - y00):0) + z01*((x01 - y01 > 0) ? (x01 - y01):0) )
acc1 = -( z10*((x10 - y10 > 0) ? (x10 - y10):0) + z11*((x11 - y11 > 0) ? (x11 - y11):0) )
acc2 = -( z20*((x20 - y20 > 0) ? (x20 - y20):0) + z21*((x21 - y21 > 0) ? (x21 - y21):0) )
acc3 = -( z30*((x30 - y30 > 0) ? (x30 - y30):0) + z31*((x31 - y31 > 0) ? (x31 - y31):0) )

Parameters

Input/Output	Type	Comments
return	v4acc80	Returned accumulation vector (4 x int80 lanes)
xbuff	v16int32	Input buffer of 16 elements of type int32
xstart	int	Starting position offset applied to all lanes of input from X buffer.
xoffsets	unsigned int	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
xstep	unsigned int	Step between each column for selection in the x and y buffers. Ystep is symmetric to xstep (ystep advances by -xstep).
ybuff	v16int32	Right input buffer of 16 elements of type int32
ystart	int	Starting position offset applied to all lanes for input from Y buffer.
zbuff	v8int32	Input buffer of 8 elements of type int32
zstart	int	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	unsigned int	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane
zstep	int	Step between each column for selection in the zbuffer.

Note

For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
Parameter 'zstart' must be a compile time constant.

v4acc80 lnegmul4_min	(	v32int32	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	xstep,
		int	ystart,
		v8int32	zbuff,
		int	zstart,
		unsigned int	zoffsets,
		int	zstep
	)

Multiply-negate intrinsic function after computing the minimum between the selected lanes from the input buffer .

acc0 = -( z00*(min(x00 , y00)) + z01*(min(x01 , y01)) )
acc1 = -( z10*(min(x10 , y10)) + z11*(min(x11 , y11)) )
acc2 = -( z20*(min(x20 , y20)) + z21*(min(x21 , y21)) )
acc3 = -( z30*(min(x30 , y30)) + z31*(min(x31 , y31)) )

Parameters

Input/Output	Type	Comments
return	v4acc80	Returned accumulation vector (4 x int80 lanes)
xbuff	v32int32	Input buffer of 32 elements of type int32
xstart	int	Starting position offset applied to all lanes of input from X buffer.
xoffsets	unsigned int	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
xstep	unsigned int	Step between each column for selection in the x and y buffers. Ystep is symmetric to xstep (ystep advances by -xstep).
ystart	int	Starting position offset applied to all lanes for input from Y buffer.
zbuff	v8int32	Input buffer of 8 elements of type int32
zstart	int	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	unsigned int	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane
zstep	int	Step between each column for selection in the zbuffer.

Note

For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
Parameter 'zstart' must be a compile time constant.

v4acc80 lnegmul4_min	(	v16int32	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	xstep,
		int	ystart,
		v8int32	zbuff,
		int	zstart,
		unsigned int	zoffsets,
		int	zstep
	)

Multiply-negate intrinsic function after computing the minimum between the selected lanes from the input buffer using small X input buffer.

acc0 = -( z00*(min(x00 , y00)) + z01*(min(x01 , y01)) )
acc1 = -( z10*(min(x10 , y10)) + z11*(min(x11 , y11)) )
acc2 = -( z20*(min(x20 , y20)) + z21*(min(x21 , y21)) )
acc3 = -( z30*(min(x30 , y30)) + z31*(min(x31 , y31)) )

Parameters

Input/Output	Type	Comments
return	v4acc80	Returned accumulation vector (4 x int80 lanes)
xbuff	v16int32	Input buffer of 16 elements of type int32
xstart	int	Starting position offset applied to all lanes of input from X buffer.
xoffsets	unsigned int	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
xstep	unsigned int	Step between each column for selection in the x and y buffers. Ystep is symmetric to xstep (ystep advances by -xstep).
ystart	int	Starting position offset applied to all lanes for input from Y buffer.
zbuff	v8int32	Input buffer of 8 elements of type int32
zstart	int	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	unsigned int	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane
zstep	int	Step between each column for selection in the zbuffer.

Note

For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
Parameter 'zstart' must be a compile time constant.

v4acc80 lnegmul4_min	(	v16int32	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	xstep,
		v16int32	ybuff,
		int	ystart,
		v8int32	zbuff,
		int	zstart,
		unsigned int	zoffsets,
		int	zstep
	)

Multiply-negate intrinsic function after computing the minimum between the selected lanes from the input buffer using small X input buffer.

acc0 = -( z00*(min(x00 , y00)) + z01*(min(x01 , y01)) )
acc1 = -( z10*(min(x10 , y10)) + z11*(min(x11 , y11)) )
acc2 = -( z20*(min(x20 , y20)) + z21*(min(x21 , y21)) )
acc3 = -( z30*(min(x30 , y30)) + z31*(min(x31 , y31)) )

Parameters

Input/Output	Type	Comments
return	v4acc80	Returned accumulation vector (4 x int80 lanes)
xbuff	v16int32	Input buffer of 16 elements of type int32
xstart	int	Starting position offset applied to all lanes of input from X buffer.
xoffsets	unsigned int	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
xstep	unsigned int	Step between each column for selection in the x and y buffers. Ystep is symmetric to xstep (ystep advances by -xstep).
ybuff	v16int32	Right input buffer of 16 elements of type int32
ystart	int	Starting position offset applied to all lanes for input from Y buffer.
zbuff	v8int32	Input buffer of 8 elements of type int32
zstart	int	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	unsigned int	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane
zstep	int	Step between each column for selection in the zbuffer.

Note

For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
Parameter 'zstart' must be a compile time constant.

v8acc80 lnegmul8_abs	(	v32int32	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		v8int32	zbuff,
		int	zstart,
		unsigned int	zoffsets
	)

Multiply-negate intrinsic function after computing the absolute value in the selected lanes from the input buffer .

acc0 = -( z00*abs(x00) )
acc1 = -( z10*abs(x10) )
acc2 = -( z20*abs(x20) )
acc3 = -( z30*abs(x30) )
acc4 = -( z40*abs(x40) )
acc5 = -( z50*abs(x50) )
acc6 = -( z60*abs(x60) )
acc7 = -( z70*abs(x70) )

Parameters

Input/Output	Type	Comments
return	v8acc80	Returned accumulation vector (8 x int80 lanes)
xbuff	v32int32	Input buffer of 32 elements of type int32
xstart	int	Starting position offset applied to all lanes of input from X buffer.
xoffsets	unsigned int	4b offset for each lane, applied to the x buffer. LSB apply to first lane
zbuff	v8int32	Input buffer of 8 elements of type int32
zstart	int	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	unsigned int	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane

Note

For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
Parameter 'zstart' must be a compile time constant.

v8acc80 lnegmul8_abs	(	v16int32	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		v8int32	zbuff,
		int	zstart,
		unsigned int	zoffsets
	)

Multiply-negate intrinsic function after computing the absolute value in the selected lanes from the input buffer using small X input buffer.

acc0 = -( z00*abs(x00) )
acc1 = -( z10*abs(x10) )
acc2 = -( z20*abs(x20) )
acc3 = -( z30*abs(x30) )
acc4 = -( z40*abs(x40) )
acc5 = -( z50*abs(x50) )
acc6 = -( z60*abs(x60) )
acc7 = -( z70*abs(x70) )

Parameters

Input/Output	Type	Comments
return	v8acc80	Returned accumulation vector (8 x int80 lanes)
xbuff	v16int32	Input buffer of 16 elements of type int32
xstart	int	Starting position offset applied to all lanes of input from X buffer.
xoffsets	unsigned int	4b offset for each lane, applied to the x buffer. LSB apply to first lane
zbuff	v8int32	Input buffer of 8 elements of type int32
zstart	int	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	unsigned int	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane

Note

For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
Parameter 'zstart' must be a compile time constant.

v8acc80 lnegmul8_max	(	v32int32	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	ystart,
		v8int32	zbuff,
		int	zstart,
		unsigned int	zoffsets
	)

Multiply-negate intrinsic function after computing the maximum between the selected lanes from the input buffer .

acc0 = -( z00*(max(x00 , y00)) )
acc1 = -( z10*(max(x10 , y10)) )
acc2 = -( z20*(max(x20 , y20)) )
acc3 = -( z30*(max(x30 , y30)) )
acc4 = -( z40*(max(x40 , y40)) )
acc5 = -( z50*(max(x50 , y50)) )
acc6 = -( z60*(max(x60 , y60)) )
acc7 = -( z70*(max(x70 , y70)) )

Parameters

Input/Output	Type	Comments
return	v8acc80	Returned accumulation vector (8 x int80 lanes)
xbuff	v32int32	Input buffer of 32 elements of type int32
xstart	int	Starting position offset applied to all lanes of input from X buffer.
xoffsets	unsigned int	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
ystart	int	Starting position offset applied to all lanes for input from Y buffer.
zbuff	v8int32	Input buffer of 8 elements of type int32
zstart	int	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	unsigned int	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane

Note

For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
Parameter 'zstart' must be a compile time constant.

v8acc80 lnegmul8_max	(	v16int32	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	ystart,
		v8int32	zbuff,
		int	zstart,
		unsigned int	zoffsets
	)

Multiply-negate intrinsic function after computing the maximum between the selected lanes from the input buffer using small X input buffer.

acc0 = -( z00*(max(x00 , y00)) )
acc1 = -( z10*(max(x10 , y10)) )
acc2 = -( z20*(max(x20 , y20)) )
acc3 = -( z30*(max(x30 , y30)) )
acc4 = -( z40*(max(x40 , y40)) )
acc5 = -( z50*(max(x50 , y50)) )
acc6 = -( z60*(max(x60 , y60)) )
acc7 = -( z70*(max(x70 , y70)) )

Parameters

Input/Output	Type	Comments
return	v8acc80	Returned accumulation vector (8 x int80 lanes)
xbuff	v16int32	Input buffer of 16 elements of type int32
xstart	int	Starting position offset applied to all lanes of input from X buffer.
xoffsets	unsigned int	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
ystart	int	Starting position offset applied to all lanes for input from Y buffer.
zbuff	v8int32	Input buffer of 8 elements of type int32
zstart	int	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	unsigned int	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane

Note

For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
Parameter 'zstart' must be a compile time constant.

v8acc80 lnegmul8_max	(	v16int32	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		v16int32	ybuff,
		int	ystart,
		v8int32	zbuff,
		int	zstart,
		unsigned int	zoffsets
	)

Multiply-negate intrinsic function after computing the maximum between the selected lanes from the input buffer using small X input buffer.

acc0 = -( z00*(max(x00 , y00)) )
acc1 = -( z10*(max(x10 , y10)) )
acc2 = -( z20*(max(x20 , y20)) )
acc3 = -( z30*(max(x30 , y30)) )
acc4 = -( z40*(max(x40 , y40)) )
acc5 = -( z50*(max(x50 , y50)) )
acc6 = -( z60*(max(x60 , y60)) )
acc7 = -( z70*(max(x70 , y70)) )

Parameters

Input/Output	Type	Comments
return	v8acc80	Returned accumulation vector (8 x int80 lanes)
xbuff	v16int32	Input buffer of 16 elements of type int32
xstart	int	Starting position offset applied to all lanes of input from X buffer.
xoffsets	unsigned int	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
ybuff	v16int32	Right input buffer of 16 elements of type int32
ystart	int	Starting position offset applied to all lanes for input from Y buffer.
zbuff	v8int32	Input buffer of 8 elements of type int32
zstart	int	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	unsigned int	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane

Note

For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
Parameter 'zstart' must be a compile time constant.

v8acc80 lnegmul8_maxdiff	(	v32int32	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	ystart,
		v8int32	zbuff,
		int	zstart,
		unsigned int	zoffsets
	)

Multiply-negate intrinsic function after computing the maximum difference between the selected lanes from the input buffer .

acc0 = -( z00*((x00 - y00 > 0) ? (x00 - y00):0) )
acc1 = -( z10*((x10 - y10 > 0) ? (x10 - y10):0) )
acc2 = -( z20*((x20 - y20 > 0) ? (x20 - y20):0) )
acc3 = -( z30*((x30 - y30 > 0) ? (x30 - y30):0) )
acc4 = -( z40*((x40 - y40 > 0) ? (x40 - y40):0) )
acc5 = -( z50*((x50 - y50 > 0) ? (x50 - y50):0) )
acc6 = -( z60*((x60 - y60 > 0) ? (x60 - y60):0) )
acc7 = -( z70*((x70 - y70 > 0) ? (x70 - y70):0) )

Parameters

Input/Output	Type	Comments
return	v8acc80	Returned accumulation vector (8 x int80 lanes)
xbuff	v32int32	Input buffer of 32 elements of type int32
xstart	int	Starting position offset applied to all lanes of input from X buffer.
xoffsets	unsigned int	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
ystart	int	Starting position offset applied to all lanes for input from Y buffer.
zbuff	v8int32	Input buffer of 8 elements of type int32
zstart	int	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	unsigned int	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane

Note

For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
Parameter 'zstart' must be a compile time constant.

v8acc80 lnegmul8_maxdiff	(	v16int32	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	ystart,
		v8int32	zbuff,
		int	zstart,
		unsigned int	zoffsets
	)

Multiply-negate intrinsic function after computing the maximum difference between the selected lanes from the input buffer using small X input buffer.

acc0 = -( z00*((x00 - y00 > 0) ? (x00 - y00):0) )
acc1 = -( z10*((x10 - y10 > 0) ? (x10 - y10):0) )
acc2 = -( z20*((x20 - y20 > 0) ? (x20 - y20):0) )
acc3 = -( z30*((x30 - y30 > 0) ? (x30 - y30):0) )
acc4 = -( z40*((x40 - y40 > 0) ? (x40 - y40):0) )
acc5 = -( z50*((x50 - y50 > 0) ? (x50 - y50):0) )
acc6 = -( z60*((x60 - y60 > 0) ? (x60 - y60):0) )
acc7 = -( z70*((x70 - y70 > 0) ? (x70 - y70):0) )

Parameters

Input/Output	Type	Comments
return	v8acc80	Returned accumulation vector (8 x int80 lanes)
xbuff	v16int32	Input buffer of 16 elements of type int32
xstart	int	Starting position offset applied to all lanes of input from X buffer.
xoffsets	unsigned int	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
ystart	int	Starting position offset applied to all lanes for input from Y buffer.
zbuff	v8int32	Input buffer of 8 elements of type int32
zstart	int	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	unsigned int	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane

Note

For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
Parameter 'zstart' must be a compile time constant.

v8acc80 lnegmul8_maxdiff	(	v16int32	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		v16int32	ybuff,
		int	ystart,
		v8int32	zbuff,
		int	zstart,
		unsigned int	zoffsets
	)

Multiply-negate intrinsic function after computing the maximum difference between the selected lanes from the input buffer using small X input buffer.

acc0 = -( z00*((x00 - y00 > 0) ? (x00 - y00):0) )
acc1 = -( z10*((x10 - y10 > 0) ? (x10 - y10):0) )
acc2 = -( z20*((x20 - y20 > 0) ? (x20 - y20):0) )
acc3 = -( z30*((x30 - y30 > 0) ? (x30 - y30):0) )
acc4 = -( z40*((x40 - y40 > 0) ? (x40 - y40):0) )
acc5 = -( z50*((x50 - y50 > 0) ? (x50 - y50):0) )
acc6 = -( z60*((x60 - y60 > 0) ? (x60 - y60):0) )
acc7 = -( z70*((x70 - y70 > 0) ? (x70 - y70):0) )

Parameters

Input/Output	Type	Comments
return	v8acc80	Returned accumulation vector (8 x int80 lanes)
xbuff	v16int32	Input buffer of 16 elements of type int32
xstart	int	Starting position offset applied to all lanes of input from X buffer.
xoffsets	unsigned int	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
ybuff	v16int32	Right input buffer of 16 elements of type int32
ystart	int	Starting position offset applied to all lanes for input from Y buffer.
zbuff	v8int32	Input buffer of 8 elements of type int32
zstart	int	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	unsigned int	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane

Note

For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
Parameter 'zstart' must be a compile time constant.

v8acc80 lnegmul8_min	(	v32int32	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	ystart,
		v8int32	zbuff,
		int	zstart,
		unsigned int	zoffsets
	)

Multiply-negate intrinsic function after computing the minimum between the selected lanes from the input buffer .

acc0 = -( z00*(min(x00 , y00)) )
acc1 = -( z10*(min(x10 , y10)) )
acc2 = -( z20*(min(x20 , y20)) )
acc3 = -( z30*(min(x30 , y30)) )
acc4 = -( z40*(min(x40 , y40)) )
acc5 = -( z50*(min(x50 , y50)) )
acc6 = -( z60*(min(x60 , y60)) )
acc7 = -( z70*(min(x70 , y70)) )

Parameters

Input/Output	Type	Comments
return	v8acc80	Returned accumulation vector (8 x int80 lanes)
xbuff	v32int32	Input buffer of 32 elements of type int32
xstart	int	Starting position offset applied to all lanes of input from X buffer.
xoffsets	unsigned int	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
ystart	int	Starting position offset applied to all lanes for input from Y buffer.
zbuff	v8int32	Input buffer of 8 elements of type int32
zstart	int	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	unsigned int	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane

Note

For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
Parameter 'zstart' must be a compile time constant.

v8acc80 lnegmul8_min	(	v16int32	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	ystart,
		v8int32	zbuff,
		int	zstart,
		unsigned int	zoffsets
	)

Multiply-negate intrinsic function after computing the minimum between the selected lanes from the input buffer using small X input buffer.

acc0 = -( z00*(min(x00 , y00)) )
acc1 = -( z10*(min(x10 , y10)) )
acc2 = -( z20*(min(x20 , y20)) )
acc3 = -( z30*(min(x30 , y30)) )
acc4 = -( z40*(min(x40 , y40)) )
acc5 = -( z50*(min(x50 , y50)) )
acc6 = -( z60*(min(x60 , y60)) )
acc7 = -( z70*(min(x70 , y70)) )

Parameters

Input/Output	Type	Comments
return	v8acc80	Returned accumulation vector (8 x int80 lanes)
xbuff	v16int32	Input buffer of 16 elements of type int32
xstart	int	Starting position offset applied to all lanes of input from X buffer.
xoffsets	unsigned int	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
ystart	int	Starting position offset applied to all lanes for input from Y buffer.
zbuff	v8int32	Input buffer of 8 elements of type int32
zstart	int	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	unsigned int	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane

Note

For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
Parameter 'zstart' must be a compile time constant.

v8acc80 lnegmul8_min	(	v16int32	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		v16int32	ybuff,
		int	ystart,
		v8int32	zbuff,
		int	zstart,
		unsigned int	zoffsets
	)

Multiply-negate intrinsic function after computing the minimum between the selected lanes from the input buffer using small X input buffer.

acc0 = -( z00*(min(x00 , y00)) )
acc1 = -( z10*(min(x10 , y10)) )
acc2 = -( z20*(min(x20 , y20)) )
acc3 = -( z30*(min(x30 , y30)) )
acc4 = -( z40*(min(x40 , y40)) )
acc5 = -( z50*(min(x50 , y50)) )
acc6 = -( z60*(min(x60 , y60)) )
acc7 = -( z70*(min(x70 , y70)) )

Parameters

Input/Output	Type	Comments
return	v8acc80	Returned accumulation vector (8 x int80 lanes)
xbuff	v16int32	Input buffer of 16 elements of type int32
xstart	int	Starting position offset applied to all lanes of input from X buffer.
xoffsets	unsigned int	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
ybuff	v16int32	Right input buffer of 16 elements of type int32
ystart	int	Starting position offset applied to all lanes for input from Y buffer.
zbuff	v8int32	Input buffer of 8 elements of type int32
zstart	int	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	unsigned int	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane

Note

For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
Parameter 'zstart' must be a compile time constant.

Overview

Functions

Function Documentation

Parameters

Parameters

Parameters

Parameters

Parameters

Parameters

Parameters

Parameters

Parameters

Parameters

Parameters

Parameters

Parameters

Parameters

Parameters

Parameters

Parameters

Parameters

Parameters

Parameters

Parameters

Parameters

Parameters

Parameters

Parameters

Parameters

Parameters

Parameters

Parameters

Parameters

Parameters

Parameters

Parameters

Parameters

Parameters

Parameters

Parameters

Parameters

Parameters

Parameters

Parameters

Parameters

Parameters

Parameters

Parameters

Parameters

Parameters

Parameters

Parameters

Parameters

Parameters

Parameters

Parameters

Parameters

Parameters

Parameters

Parameters

Parameters

Parameters

Parameters

Parameters

Parameters

Parameters

Parameters

Parameters

Parameters

Parameters

Parameters

Parameters

Parameters

Parameters

Parameters

Parameters

Parameters

Parameters

Parameters

Parameters