AR# 10155


Virtex LogiCORE PCI - The PCI LogiCORE requests the PCI bus unexpectedly after the bus master control bit is set in the Configuration Space Header


General Description:

The Virtex PCI LogiCORE unexpectedly asserts the REQ# signal after the bus master bit is set in the Command/Status register.

(The Command/Status register is located in the PCI Configuration Space Header.)


This will occur if the REQUEST user application signal is asserted before the bus master control bit is set. The Virtex PCI LogiCORE stores the most recent REQUEST from the user application after reset is de-asserted.

AR# 10155
日期 12/15/2012
状态 Active
Type 综合文章
People Also Viewed