UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 10352

Virtex-II/-II Pro/-4/-5/-6, Spartan-3/-3A/-3AN/-3ANDSP/-6 - Can I implement VREF with a voltage divider?

描述

Can I implement VREF with a voltage divider? Is there a current specification that should be followed?

解决方案

Xilinx recommends to always separate VTT from VREF because the VTT supply is very noisy. A stable VREF using a small LDO is the desirable implementation.

A voltage divider implementation is possible. Knowledge of the PCB environment (that is, frequency of coupled noise) is required to correctly calculate the details (resistance and capacitance values) of the divider circuit.

As a result, an isolated reference supply is usually a more robust and simpler approach.

AR# 10352
日期 12/15/2012
状态 Active
Type 综合文章
的页面