UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 13815

Virtex-II DCM - The CLKFX output stops; DCM is LOCKED for a short time, then unlocks

描述

The CLKFX output does not work in my design.

The M and D values are within specifications, as is the jitter measurement; however, CLKFX never locks. It will toggle at first, but will then stop. The LOCKED output will go High, then falls Low within several cycles.

解决方案

This is a known issue. When CLKFX is used, the CLKIN_PERIOD attribute must be set. If this attribute is not set, one of the bit settings for DCM will not be correctly set in Bit Generator.

Be sure to set the CLKIN_PERIOD attribute with the correct period (in ns).

AR# 13815
日期 12/15/2012
状态 Active
Type 综合文章
的页面