We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 14312

8.1i Virtex MAP - "ERROR:Map:52 - Problem encountered processing RPMs"


When I target a Virtex device where a slice RLOC value does not contain a valid suffix, MAP displays the following errors:

"ERROR:Map:57 - The RLOC parameter on LUT4 symbol "BU3776" (output signal=N4343) is missing the slice suffix. The valid suffixes are S0 and S1."

"ERROR:Map:52 - Problem encountered processing RPMs."


The errors are correct. Virtex slice RLOCs should include an "S0" or "S1" suffix.

AR# 14312
日期 12/15/2012
状态 Active
Type 综合文章